Where cafind a service manual for a 2006 pc cruizer

Coils are fed power from the TIPM/fuse panel.

didnt replace bearing correctly also did you grease them first??

Download Link:
http://www.repair-guidebook.com/2001-2004-toyota-tacoma-factory-service-repair-manual-pdf-download2001-2002-2003-2004

Yes, changing the oil will help, however, you will also have to clear the "change oil" light. Either figure out what buttons to press to delete that, or go to an auto parts store and ask if they can help you reset it.

Opel Corsa (2006 to 2010) service repair manual

Opel Corsa 2006 to 2010 service repair manual Download Manuals Technical

This is the factory service repair manual for the 2006 to 2010 Vauxhall Opel Corsa.

A must have for any Opel owner and comes in very handy when ordering parts or making repairs. The manual covers the complete tear down and rebuild, pictures and part diagrams, torque specifications, maintenance, troubleshooting, etc. You name it and its in here.

Pages: 295
Format: Pdf
Language: English
Compatible: Win/Mac

All workshop and service repair manuals are in a digital Adobe Pdf format. Tons of pictures and diagrams at your fingertips!!

Why get grease over your manual? All pages are printable, so run off what you need & take it with you into the home, office or repair shop.

--------- INSTANT DOWNLOAD ---------

its prob a fuse,,, or both light bulbs are bad

me aapi file ka user name or pass word bhula gya han kiya mere file khul sakti hai

if there is a kit thatis made for this application yes

does it go back to normal with out the trailer connected. as both mine when the trailer is detected on the wiring it turns the abs to mid setting. , as it cannot calculate the extra load. also the trailer loom can put more drain on the electrics and there is a voltage reader computer built into most vehicles this is what detects a blown bulb. check the fuse connection to the fuse and the box. in the fuse box. a weak fuse or fuse holder can make the bulb blow.

you need a brake booster as far as abs light you need to to put tester on system and find out what code it has in it before i can diag you have to seprate prolbems