Question about 2003 Mercedes-Benz E-Class

Open Question

9051 consumer shutoff,stage 1 - 2003 Mercedes-Benz E-Class

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ford ikon 1.6i lx 2005 modeltorque setting of acylinder head. how to do it.its a rocam engine


You must use new head bolts, these are one time "stretch to yield" bolts
Tighten cylinder head bolts in three stages in the sequence indicated

10--4--2--6--8

7--5--1--3--9

Tighten in the following stages
STAGE 1 ------------20 Nm 14.75 lb
STAGE 2--------------40 Nm 29.51 lb
STAGE 3 Turn head of bolt 90 degrees of rotation.

Aug 11, 2016 | 2005 Ford Ikon 1.6i

1 Answer

What does the code b0026 mean on my 2009 buick lacrosse?


DTC B0026: Driver Frontal Deployment Loop (Stage 1) Open
It has to do with air bag system
B0026 Stage 1 or B0044 Stage 2 ?€¢
The steering wheel module stage 1 or stage 2 high circuit is less than 2.4 volts and the steering wheel module stage 1 or stage 2 deployment loop is more than 6 ohms for 500 milliseconds.


?€¢
The steering wheel module stage 1 or stage 2 deployment loop resistance is greater than 4.8 ohms for 500 milliseconds.



has to do with

Jun 30, 2015 | 2009 Buick LaCrosse

2 Answers

I want to know the torque opel corsa lite 1.4 cylinder head bolts.


stage 1 ... 25 Nm (18 lb ft)
stage 2 ... angle tighten + 90 degrees
stage 3 ... angle tighten + 90 degrees
stage 4 ... angle tighten + 90 degrees
stage 5 ... angle tighten + 45 degrees

Feb 26, 2015 | Opel Corsa Cars & Trucks

1 Answer

Torq settings on 3.7 cyl heads


This is the info for the 2.8d CRDI 2008-11 engine code ENS (51C)

1 Replace Head Bolts
2 Stage 1 Tighten to15 Nm
3 Stage 2 Tighten to 30 Nm
4 Stage 3 Tighten to 85deg
5 Stage 4 Tighten to 85 deg
6 Stage 5 Tighten to 85 deg

Sequence

w93gwmwpatg0gaaaabjru5erkjggg==
If it is the 01-08 model 2.8 CRD engine code R2816K4 then it is this one
Stage 1 - Bolts 1 -18 = 30 Nm
Stage 2 - Bolts 1 -10 = 75 deg
Stage 3 - Bolts 11 - 18 = 50 deg
Stage 4 - Bolts 1 - 18 - 75 deg

Sequence
aa5xdif9xa+aaaaaaelftksuqmcc

If it is the Grand Cherokee then they fit 3.0 CRD, 4.7, 5.7 and the 6.1 SRT-8 engines. I can supply the details if needed. I hope that helps you.

Feb 04, 2015 | 2008 Jeep Cherokee 2.5

1 Answer

Hi i need torque settings for a honda ballade 1983 model 1.5 12valve ew2 motor


Main bearing stage 1: 25NM, stage 2: 50NM
Big-end bearing stage 1: 14NM, stage 2: 28NM
Cylinder head stage 1: 30NM, stage 2: 60NM

Sep 27, 2014 | Honda Accord Cars & Trucks

1 Answer

Hi I need the torque settings for both the cylinder head and the bottom end bearings for a 1997 Toyota Prado (3.4litre petrol). Thanks


1997 Toyota Prado 5VZ-FE
Cylinder head bolts:

Tighten the cylinder head bolts in criss cross manner inside out, in four stages as under:
Stage 1. Torque the bolts up to 17 Nm.
Stage 2. 34 Nm.
Stage 3. Rotate all the bolts 90 degrees.
Stage 4. Finally rotate all the bolts further 90 degrees.

Main Bearings:
Tighten the main bearing bolts in two stages, as under:
Stage 1. 61 Nm.
Stage 2. Rotate the bolts further 90 degrees.

Big end bearings:
Tighten the big end bolt of connecting rods in two stages as under:
Stage 1. 25 Nm.
Stage 2. Rotate the bolts further 90 degrees.

Feb 27, 2014 | Toyota Land Cruiser Cars & Trucks

1 Answer

Mercedes suspension issues


LOW BATTERY VOLTAGE CAN CAUSE CONSUMERS SHUT OFF!!!!!CHECK BATTERY!!!!!!!!!!

Feb 27, 2014 | Mercedes-Benz Cars & Trucks

1 Answer

Cylinder head torque specs for opel corsa 8valve 1.4l 2005 model


Corsa 1.4I Engine code Z14XE 2000-2004
Bolts must be renewed
stage 1. 25Nm
stage 2, + 90 degrees
stage 3. + 90 degrees
stage 4. +90 degrees
stage 5. + 45 degrees
Sequence
10 6 2 3 7
9 5 1 4 8
bolts 7 & 8 are nearest to the flywheel side of the engine
Engine code C14NZ 1993-1998
Stage 1. 25Nm
stage 2. + 60 degrees
stage 3. +60 degrees
stage 4. + 60 degrees
Sequence as above.
Corsa 1.4I Engine code Z14XE 2000-2004
Bolts must be renewed
stage 1. 25Nm
stage 2, + 90 degrees
stage 3. + 90 degrees
stage 4. +90 degrees
stage 5. + 45 degrees
Sequence
10 6 2 3 7
9 5 1 4 8
bolts 7 & 8 are nearest to the flywheel side of the engine
Engine code C14NZ 1993-1998
Stage 1. 25Nm
stage 2. + 60 degrees
stage 3. +60 degrees
stage 4. + 60 degrees
Sequence as above. <br />Corsa 1.4I Engine code Z14XE <b>2000-2004</b><br />Bolts must be renewed<br />stage 1. 25Nm<br />stage 2, + 90 degrees<br />stage 3. + 90 degrees<br />stage 4. +90 degrees<br />stage 5. + 45 degrees<br />Sequence<br />10 6 2 3 7<br />9 5 1 4 8<br />bolts 7 & 8 are nearest to the flywheel side of the engine<br />Engine code C14NZ <b>1993-1998</b><br />Stage 1. 25Nm<br />stage 2. + 60 degrees<br />stage 3. +60 degrees<br />stage 4. + 60 degrees<br />Sequence as above.

Jan 09, 2013 | Opel Corsa Cars & Trucks

2 Answers

Head bolt torque for 2008 6.4 ford f 350


this its the factory procedure to torque the cylinder heads

  1. NOTE: If bolt chatter occurs during Stage 4 or 5, loosen the bolt and repeat Stage 3.
    Tighten the cylinder head bolts in 7 stages in the sequence shown:
    • Stage 1: Tighten bolts 1 through 10 to 95 Nm (70 lb-ft).
    • Stage 2: Loosen bolts 1 through 10.
    • Stage 3: Tighten bolts 1 through 10 to 156 Nm (115 lb-ft).
    • Stage 4: Tighten bolts in sequence 1 through 10, an additional 90 degrees.
    • Stage 5: Tighten bolts in sequence 1 through 10, a second time, an additional 90 degrees.
    • Stage 6: Tighten bolts 11 through 15 to 24 Nm (18 lb-ft).
    • Stage 7: Tighten bolts 11 through 15 to 31 Nm (23 lb-ft).
ganyapr.jpg

Feb 13, 2011 | Ford F-350 Cars & Trucks

1 Answer

Hi, im rebuilting a 88 2.0l 8v and i need the torque mesure for the block and head bolt thx


Eng.code 3A- Cyl.head-stage 1-40Nm,stage 2-60Nm,stage 3-180degrees. Main bearings - stage 1 - 35Nm, stage 2 - 65Nm, Big ends - stage 1 - 30Nm, stage 2 - 90degrees. Flywheel - stage 1- 60Nm, stage 2 90degrees. Eng.code AAD - All torques same as engine 3A. cheers

Dec 01, 2009 | 1988 Audi 80

Not finding what you are looking for?
2003 Mercedes-Benz E-Class Logo

Related Topics:

449 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...