Question about 1995 Buick Riviera

2 Answers

My 1995 buick riviera won't start. no spark fire

I changed the crank sensor and the problem still there

Posted by on

  • vmpt_2002 Jul 01, 2009

    YES, I CHECK THE FUEL PRESSURE FIRST, BUT THE PROBLEM IS ON THE COIL PACK, I THINK?

  • Anonymous Mar 24, 2014

    have replaced,cam sensor,crank sensor,and still wont start,back firing.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Corrosion under the coil pack between the computer plates
Heres a video:http://www.youtube.com/watch?v=t_79_btzOF8

Posted on Jul 13, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

CHANGING THE CRANK SENSOR WOULD NOT HAVE BEEN THE PLACE TO START DO YOU HAVE FUEL PRESSURE? IS THEIR POWER GOING TO THE COIL PACK AND THE IGNITION MODULE TAKE OUT THE COIL PACK AND AUTOZONE USUALLY CAN TEST THOSE

Posted on Jun 25, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: 1995 sc riviera won't start

it me at johnloyd26@yahoo.com with all the problems and ill help

Posted on May 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOw many crank positions sensors on a 2000 GMC 2500 savana. I replaced one and the same code keep showing up. Crank but won’t start.


There is crank and cam sensors.If you changed the crank sensor at the front under the front crank pulley and it is in the correct installed position, you should not have a code for that,unless the wiring is defective or the crank sensor is defective.

Mar 01, 2018 | GMC Cars & Trucks

1 Answer

Car turn over wont crank


what you mean is the car turns over won`t fire/start. you need to find out if you are missing fuel or spark. check for codes. if you have no fuel it maybe a pump or plugged fuel filter. if you have no spark then it could be many things. like crank/cam sensor, poor wiring or connections, poor plugs, wires, ignition coil, even possibly a computer. check the first 3 things and go from there.

Mar 22, 2015 | 1997 Buick Riviera

2 Answers

P0134 code


Check connections of the upstream sensor you replaced. Even using the incorrect anti-seize will cause a no activity Bank 1 sensor 1 code.

May 31, 2013 | 2000 Dodge Caravan

1 Answer

2002 gmc 2500 panel van......engine stalls....code was to change cam sensor....vehicle is fine after sensor is changed however after driving for a few hours , problem of stalling returns,cam sensor has...


Have the crank sensor checked, some times a generic scan tool or code reader will pull a code but list cam sensor and then when code is read with a gm tool it reads crank sensor, can you give me the code #?
you may also have a wiring problem to cam sensor or faulty ecm or bcm. ( computer) engine control module) good day
but still have the crank tested ,good day

Sep 28, 2012 | Cars & Trucks

1 Answer

I am trying to change the crank sensor because, times when I turn the key the engine just turn but won't start. Keep trying after 20 minuts ro so and cranks right up. trying to remove the harmonic...


yes there is u need a 3 prong puller hook to remove it. it will hook behind the balancer but u also need to disconnect the motor mount to drop the pulley below the frame of the car

Jul 12, 2011 | 1995 Buick Riviera

1 Answer

It wont start it turns over but spark plugs arent firing


Check the voltage to the ignition coil...Sometimes there are several signals from emission sensors to the ECC that will stop the coil pulser circuit. For instance the "Crankshaft Position Sensor.

Good Luck

Jun 29, 2011 | 1995 Buick Riviera

1 Answer

Car is hesitating have error code p1391 check engine light is on what does this code mean it is not in the book I just put a crank posistion sensor and that fixed it ,now it is doing it again only worse...


p1391 is intermitant loss of signal from crank sensor and cam sensor--change sensors!! change cam sensor first. good luck!! then try it, if still same way. change crank sensor.

Nov 26, 2010 | 2002 Chrysler Sebring

1 Answer

1997 Ford Taurus 3.0 2v. Check engine light came on (did not change in the way the car drove) and Autozone diagnostic pointed to cam sensor, but the tech there was thinking crank sensor when he showed me...


try getting a crank sensor from ford also use sandpaper and clean the mounting area of the crank sensor screws, and check all your fuses it is possible that one might have popped while you were prying off sensor none are marked that is why you have to check them all. if you end up changing you cam sensor it is recommended you change the synchronizer gear under the sensor you can purchase both as a kit for about 5o dollars.because if you don't you will soon hear a loud squeal from the gear causing you to go back to that area again.

Nov 13, 2010 | 1997 Ford Taurus

1 Answer

Cranks has no spark and tach does not move when cranking change crank sensor


you can try changing it
if you had a proper scanner you could see if there is any rpm coming from the crank sensor

Nov 04, 2010 | 1996 Eagle Talon

Not finding what you are looking for?
1995 Buick Riviera Logo

871 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...