Question about 1990 Ford F150

2 Answers

LOW OR NO OIL PRESSURE ON A F150 4.9 - 1990 Ford F150

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 426 Answers

If ya checked cooler line and your not leaking, not a clogged filter,and you have been doing oil changes properly, oil pump is probably the problem. You can try some additives between an oil change but its just a shot in the dark with additives.

Posted on Jun 25, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 47 Answers

Check the oil level. When was the oil filter replaced. Could be a bad oil pressure sensor. Could be a corroded connector on the oil pressure sensor. Clean and reattach.

Posted on Jun 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does low oil pressure on 2008 Chevy Impala 3.5 V6 LS


Do you mean what causes low oil pressure? This is a very reliable engine for the most part. If the oil light is on or gauge is reading low, have the oil pressure sensor inspected for failure. These sensors do go bad.

Jan 27, 2016 | Cars & Trucks

1 Answer

Low oil pressure


low oil pressure caused by worn engine bearings and faulty oil pump or oil pump pick up screen clogged with sludge.if oil pressure low engine will knock.check oil pressure oil pressure sending unit could be bad.

May 08, 2013 | GMC Jimmy Cars & Trucks

1 Answer

Low oil cause low oil pressure


No, the oil level nothing to do with the pressure.
If you have low pressure, check the sender unit, check the pressure with a mechanical gauge, if still low, check the pump

Mar 28, 2013 | Cars & Trucks

1 Answer

Low presure oil


first thing check is the engine oil level.if oil level okay check oil pressure should be for the 4.2 engine oil pressure should be 12 psi @ 1200 rpm for the 5.3 oil pressure should be 18 psi @ 2000 rpm if oil pressure good problem in the oil pressure sending unit. if oil pressure is low problem faulty oil pump or worn crankshaft bearings if oil pressure low engine will have rod knock.make sure you are using correct oil viscosity if oil too thick you will have low oil pressure oil too thin you will loose oil pressure.

Nov 26, 2012 | 2004 GMC Envoy

2 Answers

Oil gauge drops low at idle


Low oil pressure at idle can be caused by an engine with worn rod or main bearings due to (usually) high mileage . This however does not mean the engine is still not serviceable as long as the oil pressure is low only at idle. The pressure should at minimum get into the normal range at anything above idle speed.Not much oil pressure is really necessary at LOW speed. At low speed, as long as there is oil getting to the bearings, even at low pressure, you are OK. In a high mileage engine the oil pressure is often low at idle simply because the oil pump is turning slowly and cannot maintain higher pressure between the larger than normal crankshaft and bearing clearances. As speed increases the pump turns faster and supplies more oil and the pressure should go higher. Low pressure as long as it is only at idle is not a problem. However at higher speeds the pressure should be in the normal range. Such a worn engine can benefit from higher viscosity (thicker) oil such as 20W-50 in above freezing weather and 10W-40 in winter. That will increase idle pressure and the thicker oil film maintains a better film between the worn parts

Apr 08, 2012 | 2002 Jeep Grand Cherokee

2 Answers

What does a low oil pressure alarm mean


It means the sensor that detects your oil pressure has seen a situation where the oil pressure is too low and engine damage will result. Could be just a bad sensor, but better have it checked with a mechanical gauge to see exactly what the pressure is.

Jan 10, 2010 | 2001 Pontiac Montana

1 Answer

Low oil pressure light comes on and i changed the sensor


does the oil pressure gauge show low oil pressure?is it low oil pressure light? or low oil light? 2 sensors on this vehicle.make sure you get a chevrolet oil sensor,aftermarket sensor do not do well,make sure your using 5w30 or 10w30 wieght oil,if you are putting out over 20 lbs at idle in gear,i see no problem,should go up to 40 or better on accel,if it is low oil pressure and the gauge conferms,possible engine wear

Dec 07, 2009 | 2001 Chevrolet Monte Carlo

1 Answer

WARNING MESSAGE sTOP: OIL PRESSURE ...wHAT IS


Check your oil, it may be low if not the oil pressure needs checked. The sending switch could be bad or you have low oil pressure. If you have low oil pressure have it fixed ASAP. The loss of oil pressure can cause severe engine damage.

Sep 26, 2009 | 2007 Volkswagen Passat Sedan

1 Answer

Low oil pressure


If low oil pressure is verifiable the only repair is replacement of the oil pump assembly.

Start by verifying oil pressure with a mechanical oil pressure gauge. If oil pressure is low then replace oil pump.

Jun 07, 2009 | 1990 Ford F150

2 Answers

I have low oil pressure in my 1994 chevrolet suburban


start by testing your oil pressure sensor, and then if not that drop your oil pan and the screen on your oil pump tube may be restricted. or change the oil pump could be weak

Jan 23, 2009 | 1994 Chevrolet Suburban

Not finding what you are looking for?
1990 Ford F150 Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...