Question about 2000 Ford Focus

2 Answers

Fan does not work on 1,2 or 3 just works on 4 and A/C does not come on

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 115 Answers

Resistor problem. the reason it works on 4 is because 4 bypasses the resistor. the a/c may not come on due to low refridgerant. it's a saftey feature to save a/c components. needs to be recovered, leak checked, fixed and refilled.

good luck

Posted on Jun 25, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 426 Answers

Your blower has a resistor,that is what is wrong with it.

Posted on Jun 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IF THE 1 AND 2 SELECTOR ON THE FAN DOES NOT WORK AND 3 AND 4 WORKS?


I had this fault on my Ford Ranger. The control board was toast, and needed replacing.

Aug 29, 2014 | Cars & Trucks

1 Answer

Fan for air condition does not work


but works for heating?
shoe drops.
what fan/ , my car has 4
1 in front of condensor
2 behind rad.
1 in dash heater box.
name one. for a/c to work , they ALL must work right.

Feb 13, 2014 | 1992 Toyota Previa

1 Answer

I have a 06 2500 dodge sprinter and the fan control speed wheel isnt working. Settings 1-4 will not work. I can feel hot or cold air coming out of the vents while I'm driving but cannot adjust it.


I have changed the resistor 2 times for the same problem. Its under the hood behind the fan motor insulation.
Mine burned because of fan motor frozen & stuck in the winter. Solution is to let the engine warm up before turning the fan on.
Cheers, Brian

Jun 30, 2012 | 2006 Dodge Sprinter

1 Answer

My 2000 Mazda MPV heater fan works for 4 not for 1


You need to replace the blower motor resistor,it's in the heater box.Number 4 bypasses the resistor and all the other speeds go through it so it's the most likely problem.

Feb 19, 2010 | 2000 Mazda MPV

1 Answer

Fan on c3 will only work on no 4 setting 1 2 3 not working any ideas


these systems use a resistor pack,setting 1 2 3 go through resistors to vary fan speed, 4 is fast speed-- no resistor in circuit. don't know where it is located but usualy in aplace it can get cool air, try follow the wires back from the fan motor to the switch.

Feb 08, 2010 | 1983 Chevrolet K1500

1 Answer

Fan for heat/air will not work on 1-4 settings


check the blower motor resistor that is where the different speeds come from

Dec 07, 2009 | 2002 Buick Rendezvous

1 Answer

Fan runs on 1 & 4 only. believe a reastat type problem. Agree?


The Thermostat / control board is located inside the vehicle right under the glovebox ( in fact un-hinge the glove box for a better working angle ), the board is right on the fan itself. There are ( 2 ) screws holding it in. A new board can be ordered thru CARQUEST for about 15.00. Their new model dosen't contain the small surface mount resistor that originally blew out. You cant repair the board because it's coated in epoxy "potting compound". If none of the 1 thru 4 levels on the fan work it's either the relay ( in the relay box in the engine compartment ), or the fan. If only a few of the 1 thru 4 levels works, then it's definately that control board.

Jul 13, 2009 | 2006 Jeep Liberty

1 Answer

Interior air fan speeds 2, 3, and 4 have quit working.


Either the fan itself is shot, or there is a vaccuum leak on the hoses in back of control switch

Jun 27, 2009 | 1998 Oldsmobile Silhouette

2 Answers

Fan speed switch only works on #5


Call your local GMC Dealer and see if they have the climate control panel in stock. What happens is the circuit board on the back of the panel shorts out. The panel comes as an assembly and is very easy to replace. Don't go with a wrecking yard piece. I made that mistake once and it didn't work either. I got one from the Chevy dealer and it worked perfectly.

Aug 21, 2008 | 2002 GMC Sierra

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...