Question about 2001 Chevrolet Silverado 1500

2 Answers

Lights on push button 4 wheel drive out

The light went out on the switch and now it is stuck in 4H. I replaced the dashboard switch and the lights will still not come back on. When I crank the truck the lights flicker for a second but them go right back out again. Also the Service 4-wheel Drive light is staying on.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 115 Answers

More than likely there is a code set for the 4 wheel drive system and its stuck in a "limp in" mode. you're going to need to get your hands on a code reader or take it in to the dealer for a diagnosis.

Posted on Jun 25, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Have the electronic transfer case checked the switch is stuck or broken

Posted on Jun 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 chevy blazer 4x4 The 4 wheel drive dash switch is brand new. When in 2 wheel drive none of the buttons light up. When I push 4 hi the 4 hi and 4 lo button lights light up and seems to be in 4 hi. When...


It could be a junk switch or it could be bad contacts inside the transfer case motor.. Does the transfer case switch to the selected gears? Everytime? If so, you might try another switch. If it does the same, I would say the motor contacts are bad. Replace the motor if you want the lights, But I personally wouldn't do it until the motor quit switching gears. They're not cheap.

Nov 13, 2014 | 1999 Chevrolet Blazer

2 Answers

Cant get out of four wheel drive


If your truck has a dashboard push-button 4x4, then carefully disassemble and clean with Q-tips and alcohol. when 4x4 lights turn off, drive in reverse over 15 feet. Good luck.

Nov 20, 2010 | 1999 GMC Jimmy

1 Answer

1988 Jeep Sahara, 4 wheel drive will not engage


maybe its just the indicator thats not lighting up

Feb 26, 2010 | 1988 Jeep Wrangler

1 Answer

1993 Chevrolet S-10 Blazer won't go into 4-wheel drive


no fuse...mine was stuck in low and i had to replace vacume hose in the transfer case about 200.00 bucks

Dec 29, 2008 | 1993 Chevrolet S-10 Blazer

2 Answers

4x4 will not engage in 96 gmc yukon


I just fixed a friend of mines 96 yukon...shift to neutral press 4H and u can hear the actuator make noise (we even replaced it with a new one his idea and the same thing happen as old one), so as he hit the switch for 4H i layed under it (on 4 jack stands) and I could hear the motor on the transfer case make a loud noise (well thats working) and before all this I asked him did u check all your fuses (he said guarnteed to be all good) one night it was bothering me so i looked through the owner manual for the yukon and in the fuse box on driver side by the door there are (2) fuse for the 4wheel drive unit,pull one of the fuses good...pulled the other one and it was blown put in a new fuse and it works like brand new..pull fuse for anything that has to do with 4 wheel drive componants,

Dec 18, 2008 | 1996 GMC Yukon

1 Answer

Stuck in two wheel drive. I changed my front wheel bearing the four wheel drive went out. The four wheel drive lights on dash blink then go out. Service 4 wheel drive comes on. Is there a servo that...


There is an electric motor that engages drive.  Mine was stuck and a mechanic beat it w a hammer while I was in vehicle w brake on in drive pushing the diff 4wd buttons.  It freed up and started working fine!!  It looks like a small starter under car on passenger side. Or buy one on ebay  for cheap and replace it

Jul 21, 2008 | 2000 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...