Question about 2008 Chevrolet Malibu

2 Answers

I have a 2008 chevy malibu and i just had my oil change..how do you reset the oil sensor to 100%?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 07 malibu and found you have to turn key to run but don't start, scroll thru the listings first using the 'i' button and stop at the 'oil life x%', hold the enter the 'menu' button for one second, then press the arrow button below the menu button to get the 'acknowleded' and it will change reading to 'oil life 100%'.

Posted on Mar 15, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 72 Answers

  1. Display "OIL LIFE RESET" on the Driver Information Center (DIC).
  2. Press and hold the "ENTER" button for at least one second. An "ACKNOWLEDGED" display message will appear for three seconds or until the next button is pressed. This will tell you the system has been reset.
  3. Turn the key to "LOCK/OFF". If the "CHANGE OIL SOON" message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

Posted on Jun 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 chevy malibu gas gauge always on empty, replaced the fuel pump


Need to replace the sensor inside the gas tank. I have a 2008 Malibu with the same problem. It was a faulty fuel gauge sensor.

Jan 31, 2012 | 2003 Chevrolet Malibu

1 Answer

Where can I find the cheapest dealer oil change for my 2008 Chevy Malibu around Detroit?


you will just have to call around remember the cheapest isnt always the best. I would recommend finding a dealer you trust and stick with them so they will be able to pull your service history if you have problems later on.

Apr 28, 2010 | 2008 Chevrolet Malibu

2 Answers

How do I get the "change oil" message off my 2008 f 450 superduty?


Message center cluster
#1 press and release setup button until mess. cntr. displays"press reset to begin system check"
#2press and release reset button until cntr. displays"hold reset if new oil"
#3press and hold reset button for 2 sec. and release oil life should read 100%
#4 center displays"setup menu hold reset"

base cluster
#1 press and release trip/reset button until mess. cntr. displays"setup menu hold reset"
#2press and hold trip/reset button 2 sec. until mess cntr. displays"reset for system check"
#3 press and hold trip/reset button 2sec. until mess. cntr. displays"oil life XX% reset if new"
#4 press and release trip/reset button until mess.cntr.displays"hold reset if new oil"
#5 press and hold trip/reset button for 2 sec.and release to reset to 100%
#6 mess. cntr. breifly displays oil change set to 100%.

HOPE THIS HELPS

Feb 10, 2010 | 2008 Ford F 250 Super Duty 4WD

3 Answers

I changed the oil on my 2008 Chevy Cobalt. How do I reset the computer. The car did not come with a book.


turn the key on the on postion and step on the gas pedal three times in a row.....

Dec 23, 2009 | 2008 Chevrolet Cobalt

3 Answers

2008 Ford Escape oil change message


to reset the oil monitoring system to 100% , press SET control to access the system check functions , press and release the SET control to display OIL CHNG XXX% HOLD SET NEW , press and hold the SET control for 2 seconds to display OIL CHANGE SET TO 100% , oil life is now reset . thank you !

Dec 30, 2008 | 2008 Ford Escape

2 Answers

Coolant Temp Sensor 03 Malibu


coolant sensor maybe 19 mm key its near the upper radiator hose in the engine thanks pierre

Jun 16, 2008 | 2003 Chevrolet Malibu

Not finding what you are looking for?
2008 Chevrolet Malibu Logo

501 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...