Question about Ford Windstar

1 Answer

I need to locate the relay or breaker for the fuel pump on a 1996 winstar I have taken the fuel pump out and i get no power at the jumpers on the pump which leads me to belive that it is a relay problem Thanks Craig harimon

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

It is located in the ccrm, which is a black box with all the relays built into it

Posted on Jul 01, 2009

  • chris wickware Jul 01, 2009

    it is located in the ccrm, which is a black box with all the relays built into it

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know where is the gas ralay for a 1999 for winstar


The fuel pump relay ought to be in a Powerbox under the hood. You might investigate the Inertia switch to see if the switch activated. This would kill the power to the fuel pump and is a safety item. You can Search for videos and photos of the parts you want by creating a search using your computer. Title it with your Make and Model and Year vehicle and then add terms like location of inertia switch or location of fuel pump relay. Some mechanics post Youtube videos and other media for fixing vehicles.

Usually the inertia switch is behind a front floor kick panel and has a reset button on it.

Oct 02, 2014 | 1999 Ford Windstar

1 Answer

Fuel pump will not come on 1996 gmc sonoma 4.3


Well that is the correct action of the pump relay. The computer grounds the pump relay for a couple of seconds to prime the pump then the oil pressure switch provides power once the engine starts.
You should be able to jumper the relay and power the pump as much as you want to test the circuit.

Jan 03, 2013 | 1996 GMC Sonoma

1 Answer

1996 audi a4 fuel pump @ or fuel pump relay


It would be easier to run a hot wire from the front to see if it runs.
Normally you would jumper the pump relay to test the pump.

Oct 03, 2012 | 1996 Audi A4

1 Answer

No power to fuel pump


The first thing you would check is the fuel pump relay.
By jumpering the relay terminals you should be able to power the pump to check it. The relay gets a ground signal from the computer for 3 seconds during startup.

Sep 22, 2012 | 1996 Chevrolet Suburban

1 Answer

Fuel pump not working


The fuel pump is powered by a relay and a fuse. No circuit breakers.
The relay and fuse should be in the fuse box in the engine compartment.

Sep 21, 2012 | 1998 Oldsmobile Silhouette

1 Answer

Fuel pump not geting power


CHECK THE INERTIA SWITCH FIRST , IT'S LOCATED BEHIND THE PASSENGER SIDE KICK PANEL THERE IS A ACCESS HOLE TO CHECK RESET BUTTON.. CHECK FOR POWER AT THE TERMINALS WHILE THERE ...THE FUEL PUMP WILL RECIEVE POWER FOR 2 SECONDS WHEN IGNITION IS TURNED ON IF NO POWER (12VOLTS) CHECK FUEL PUMP RELAY IN ENGINE COMPARTMENT RELAY BOX , IF NEEDED SWAP RELAYS AND RETEST , ALSO THE POWER RELAY SUPPLIES VOLTAGE TO PCM WHICH IN TURN ENERGIZES FUEL PUMP RELAY SO CHECK BOTH RELAYS ALSO

HOPE THIS HELPS

Aug 08, 2010 | 1996 Ford F150 Regular Cab

2 Answers

91 ford ranger...fuel pump will not run pump is good


Maybe you need to test the (pcm) power relay, it controls the fuel pump relay. Once the key is turned on the pcm will initialize the power relay, it in turn will turn on the fuel relay for 2 seconds to prime the fuel rail prior to starting. Since the pump runs continuosly, it means the pcm isnt properly grounding the ckt or the relay is faulty.

Oct 14, 2009 | 1991 Ford Ranger Supercab

3 Answers

Is there a breaker or a fuse for the fuel pump and if so where do I locate it?


the fuel pump has a fuse, it is located in the under hood power distribution box, it just beside the fuel pump relay, believe it is marked ECM 1.

Sep 12, 2009 | 1996 GMC Jimmy

1 Answer

1996 windstar relay


The fuel pump power on the Windstar is controlled by a component called a Constant Control Relay Module (CCRM).
Its located located on the driver's side of the engine compartment.d7fb0ae.jpg

Oct 22, 2008 | 1996 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...