Question about 2001 BMW 330

2 Answers

Reset the service milage for 330ci 2003

330ci reset service milage

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 21 Answers

Assuming this is a service level indicator and not Check Engine Light, instructions by bwwatson above are incorrect.

Please note, I don't recommend resetting this unless you perform BMW's service recommendations first.

After Mid-2000: You should not have the 20-pin DLC connector. You only need to hold the left odometer reset button in while turning the key to position 1 (Accessory). Keep holding the button for 5 or so seconds until any of the following shows in the display: OIL SERVICE or INSPECTION with RESET or RE. Release the button and press it again for another 5 or so seconds until RESET or RE flash. While the display flashes, press the button one more time briefly. If done correctly, END SIA should show up for a few seconds. All done.

Posted on Jun 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

Turn the ignition key on and leave on for approximately 2 minutes, this works with most service light lissues, if it does not, i need to know what caused the light came on.

Posted on Jun 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset service indicator


https://www.youtube.com/watch?v=GwEDfQKtVBo

Aug 06, 2014 | BMW X3 Series Cars & Trucks

1 Answer

How do you reset the recomended service log on a Renault laguna 1.8 16v Privaledge


put the key on acc then push milage to zero and hold it turn key to on and watch milage meter. hope it works. if not take neg post off batt for 20min

Mar 01, 2013 | Cars & Trucks

1 Answer

How to get out water leakage on top of my 2001 f-150 engine


Please email me the engine size information on reply.
Pick one from below.
V6 - 4.2L vin 2 256ci - MFI GAS OHV V8 - 4.6L vin W 281ci - MFI GAS SOHC V8 - 5.4L vin 3 330ci - MFI GAS SOHC Super-charged V8 - 5.4L vin L 330ci - MFI GAS SOHC V8 - 5.4L vin M 330ci - MFI CNG SOHC V8 - 5.4L vin Z 330ci - MFI BI-FUEL SOHC Harley-Davidson Edition -- V8 - 5.4L vin L 330ci - MFI GAS SOHC Lightning -- V8 - 5.4L vin 3 330ci - MFI GAS SOHC Super-charged
====
Please identify the color of the leakage.
Green? brown/rusty? oily?
Most likely is coolant leak but on high mileage engine it can be oil vapor + morning cold air condensation.
How many miles is on this engine?
How much water leakage is seating on for of the engine?
Is it in on particular spot?
====
I strongly recommend you to open a CHAT SESSION instead of a single page email session.
You will need a lot of back and forth Question and Answer to trouble-shoot this leakage problem.
I will glad to help if you post a CHAT SESSION.

Dec 18, 2010 | 2003 Ford F150 Regular Cab

1 Answer

Hi - i have a 2003 bmw 330ci that starts


starter motor, ignition switch, starter relay, fuse connections.

Jul 01, 2010 | 2001 BMW 330

1 Answer

I had my headlight switch module changed on my BMW 330ci and the dashboard display has the 2 taillights on? What should I do to reset it?


Im sure your tail light is not working properly. i suggest you to check all the bulbs , wire connector for possible burn out( common problem) or take off the rubber grommet at trunk lid close to hinges cause normally the wire there got damages. I hope it will help you. good luck!

Jan 18, 2010 | 2003 BMW 330

1 Answer

2003 Instrument cluster reads all different letters and symbles


Hello,
It sounds like it was programed in correctly or not at all.

I hope this helps.

Roy

Nov 04, 2009 | GMC Sierra 2500HD Cars & Trucks

1 Answer

My top will not go up -- 2004 330ci


think their is some sort of relay safety device under the seat or in the boot and it needs resetting ,heard other mechanics talk about it but havent done one myself

Sep 08, 2009 | 2003 BMW 330

1 Answer

These codes comes out P0741


Your torque converter is not locking up.
The solution is to have the torque converter replaced and the transmission serviced.
Hopefully, you are still under warranty and can get it repaired it for free.
If not, it can get pretty expensive.

May 05, 2009 | 2003 BMW 330

Not finding what you are looking for?
2001 BMW 330 Logo

560 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...