Question about 1992 Ford Explorer

2 Answers

Is there a special tool to take off the rotor on the 1992 ford explorer 4x4

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

No special tool after removing the 4x4 hub the big nut in the middle has a flat metal pin that slides into a slot inside the nut you can remove it with a magnet then the nut will come off easy

Posted on Jun 25, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 414 Answers

If there is a phillips screw between two studs remove it using an impact screwdriver, then firmly hit rotor with a hammer. .. rotor off

Posted on Jun 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram for a 99 explorer timing chain 4.0 4x4


it needs a special tool from ford the kit is 500 i think. used engine is cheap u can also put a 98 or 97 motor if its cheaper change the valve cover and intake also fly wheel exhaust manifold from the bad motor. i have done it works every time.

Dec 02, 2012 | Cars & Trucks

1 Answer

How do I remove the front brake rotor?


if this truck is 4x4 then you have a front hub assembly to remove first. Loosen the center screw behind the bearing cap and the rotor will come off then

Nov 17, 2010 | 1992 Ford Explorer

1 Answer

How do i put my 1992 explorer in 4WD


You can put it in 4x4 when you are dring straight and have no tires spinning , if you want 4x4 you must stop put the vehicle in neutral hold the brake and go to low range and must do the same thing going back to high

Mar 31, 2010 | 1992 Ford Explorer

1 Answer

Replace front wheel bearings 99 ford explorer


not press fitted, standard tapered bearings, if 4X4 it is a little more involved, just dont misplace any of the smaller parts and you will be fine.

Aug 29, 2009 | 1999 Ford Explorer

2 Answers

Replace rear wheel bearing 2002 ford explorer 4x4


you must remove brakes, then remove axle nut, then remove upper control arm and finally tie rod stabilizer, remove axle from car then bearing can be accessed. this is a difficult job that requires special tools so be careful

Aug 15, 2009 | 2002 Ford Explorer

1 Answer

Front Brake disk repear\replacement


try going to real auto parts store not some chain franchise like pepboys or autozone ,with bolts means studs to a ford which will be a rotor with hub unit,and if it has just has holes then it's a slide on rotor or it needs to be pressed to your hub assembly,just go to a small parts store with someone who knows the difference,,2wheel or 4x4 makes all the difference.

Apr 27, 2009 | 1996 Ford Explorer

1 Answer

Why won't the 4x4 kick in on the 1994 ford explorer


I have a 1992 4x4 eddiebauer edition and unless I was doing 25 miles an hour mine would not kick in either. For low range I had to put it in 1 on the gear shifter

Jan 08, 2009 | 1994 Ford Explorer Limited

Not finding what you are looking for?
1992 Ford Explorer Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...