Question about 1990 Toyota Camry

1 Answer

Brake light turn off while applying brakes - 1990 Toyota Camry

Posted by on

  • bad_dog1
    bad_dog1 May 11, 2010

    Do they ever turn on when you apply the brakes?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Check brake lite switch on the brake peddle arm

Posted on Jun 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuses keep burning out; rear lights don't come on when brakes are applied. Is there a connection between these two problems?


There is a problem with your question
from what you say the brake lights do not come on when the brakes are applied --that would most likely be a faulty brake light switch
The fuse blows when the hand brake is applied indicates a short after the hand brake switch before the brake indicator in the dash that lets you know the hand brake is applied
you say that the rear light come on when the light switch is turned on--does the fuse blow then , when the brakes are applied or only when the hand brake is applied
a clearer question with a lot of detail ( make , model year , engine size etc)will get a closer answer

Dec 17, 2015 | Cars & Trucks

1 Answer

Third eye works no rear signal or brake lights


The high mount brake light gets its own signal from the brake light switch (on the brake pedal). Or at least the wire leaving the brake light switch will splice, one wire to the high mount brake light, and the other for the rear brake lights is routed through the turn signal switch, and coordinated there with the turn signal wires to the rear brake lights. The brake wires and turn signal wires share the same wire, and same filament in the bulbs. It is kind of complicated, but brakes applied with no turn signal, brake light wire goes from brake light switch through the turn switch and out to the bulbs. If brakes applied with turning signal, non blinking brake light wire goes from turn switch to rear light, while the turning signal wire will go through the flasher relay, and then to the rear light to cause blinking.

I hope that makes sense. It appears the problem may be in the turn signal switch for both the turn signals and the rear brake lights.

Mar 14, 2015 | 2007 Dodge Ram 3500 Quad Cab Laramie

1 Answer

2005 Suburban brake signal light issue


Sounds like a faulty turn signal switch. The brake light wire is routed through the turn switch, so it appears the turn switch has gone crazy.

Dec 27, 2013 | 2005 Chevrolet Suburban 1500

2 Answers

I have no brake lights on my 2005 oldsmobile alero


Try wiggling the turn signal switch and applying the brakes.Have somebody check and see if the brake lights come on or flicker while wiggling the switch and applying the brakes. Try this after verifying the bulbs are good. If the brake lights come on after even briefly the turn signal switch needs replaced.

Jul 30, 2010 | 2004 Oldsmobile Alero

1 Answer

Brakes applied, brake light turns on but other running lights off


The brake switch under your brake pedal may be defective. It turns on the brake lights when brakes are applied, if it is defective within the switch, it may short your other lights when brakes are applied. The switch can be replaced by you and it not expensive.

Jan 07, 2010 | 1996 Mitsubishi Mirage

1 Answer

Brake light problem Corolla 97


the tail light and brake lights are working from double contact bulbs. check the grounding, you dont have enough ground from one of the bulbs

May 30, 2009 | 1997 Toyota Corolla

1 Answer

When dim head light is turned on, right side brake light is on with high intensity. When brake is applied, the right side brake light is still on. Meanwhile left side brake light behaves normally-dim head...


sounds like you may have a bad brake light switch i think you problem will go away if you change it out. hope this has been of some help to you !

May 30, 2009 | 1997 Toyota Corolla

1 Answer

Brake lights wnt wrk when pushing dwn brake, but park lights do


As cadman mention to check the fuse, and if there ok check your brake light switch along the brake peddle arm. Before you doany of that, turn your hazard light on to make sure that all your light's are not burnt out. Good luck

Apr 08, 2009 | 2004 Kia Rio

Not finding what you are looking for?
1990 Toyota Camry Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...