Question about 1999 Chevrolet Blazer

1 Answer

98 blazer- where are the fuel filters located, I was told there are 2. Doesn't start, turns over and it sounds like the pump is working. I took off air filter housing and poured in a little gas and it started for about 5 seconds. Second time did the same.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Fuel filter is under driverside frame

Posted on Jun 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

If oil pressure sending unit is bad will it stop fuel pump from working on a 2000 blazer


You should never try a pump without it being in fuel. It uses fuel for lubrication when it is running. If the vehicle doesn't start at all when you first crank it over it is not the oil pressure sender. If you just put the pump in you might want to turn the key off and on several times to cycle the pump then try to start it. If it doesn't start then check fuel filter or check fuel pressure at fuel rail in engine compartment. Is fuel pump cycling at all when the key is turned on? There is a problem with ignition switches on some of these blazers.

Jan 04, 2012 | Chevrolet Cars & Trucks

1 Answer

GMC 2000 sierra pick up 1500 sounds like it wants to start but won't turn over. Battery sounds good so I guess battery and alternator are ok. For several years fuel gauge doesn't work and...


It sure could be. But, first...by "won't turn over" you do mean it cranks at normal speed but won't start?
A simple test of the fuel pump is to stand by tank and listen as someone turns key to on. When first turned to on, your pump will activate for 2 or 3 seconds, pressurizing the fuel system, and then shut off if the engine computer doesn't get a cranking signal. Do you hear it come on? If not, then something's not turning your pump on. If you can hear it buzz on briefly, then maybe it's your filter. Another test: Spray a little starting fluid into your intake manifold (remove the big hose going into intake manifold) while someone tries starting it.If it doesn't fire and try to stay running, then it's probably an ignition problem. But if it does fire off, then you know it's a fuel problem-likely your pump or filter. good luck.

Nov 07, 2011 | 2000 GMC Sierra

1 Answer

98 Chevy blazer won't start up but will crank ,,


Try giving it a shot of starting fluid. You don't say if it's actually firing. If it tries or runs for a few seconds off of the starting fluid then try changing the fuel pump relay. It's inside of the glove box on the left hand side behind the little door. If that doesn't work it's most likely the fuel pump.

Jul 21, 2011 | 1998 Chevrolet Blazer

1 Answer

Engine turns over, but will not start.


Check the fuel pump for pressure by removing the send line from the fuel filter and ranking the car. Place the line in an empty 2 liter soda bottle and have a friend crank the engine a couple of times to see if the pump sends fuel. If not, replace the fuel pump an replace the filter since you will have a line removed already.

Jun 01, 2010 | 2001 Chevrolet Blazer

1 Answer

My blazer I went to start it and it do not want to start. I had someone look at it and the pounded on the gas tank and it started. I took it for a ride and then it wouldnt start after I turned it off. Is...


Hello kbyrd2409: My name is Roger and I will answer for you. If you beat on the fuel tank and it started? Then you should replace the fuel pump. Most of these pumps are made as a module unit. This means the fuel pump and sending unit are all one piece. The pump is located in the fuel tank. The fuel pressure should be 60 to 66 PSI. I would suggest replacing the fuel filter also. A dirty fuel filter will kill of a good fuel pump.
Please rate the quality of your answer. This way we know that your answer helped. Thank You for using Fix Ya. Roger

Sep 19, 2009 | 1999 Chevrolet Blazer

1 Answer

1994 Chevy S-10 Blazer 4-door fuel pump replaced but not working


you should have 2 ecm fuses under the dash in the fuse box check these one of them is probably blown I have had 2 s10 that blow this fuse occasionally

Jan 30, 2009 | 1994 Chevrolet S-10 Blazer

3 Answers

98 blazer stalls


It could be your fuel pressure regulator, check this link for details:

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528022b9c4

8e44b4b.jpg That's what it looks like.

Aug 09, 2008 | 2000 Chevrolet Blazer

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...