Question about 2001 Ford Focus

Open Question

2.0 ford focus engine timing marks - 2001 Ford Focus

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2000 ford focus twin cam timing

please helpme i need timing marks for ford focus 2000 16 valvs

Posted on Oct 13, 2008

  • 184 Answers

SOURCE: timing mark-specs

ADVISE YOU NOT TO TOUCH THIS UNLESS UR MECHANILLY COMPENENT YOU NEED SPECIAL TIMING PINS & BAR FOR THIS & ARE NOT THE EASIEST TO TIME UP.

Posted on Jan 14, 2009

  • 1596 Answers

SOURCE: Need timing marks for 2002 ford explorer 4.0




The Info I Have Is Extensive and Has Illistrations, I Need to Emali it to You As it is Very Large, This Is A Small Example Im @rejakwilson@aol.com

Special Tool(s)

  1. With the vehicle in neutral, position it on a hoist.
  2. Remove the intake manifold.
  3. Remove the fuel supply manifold.
  4. Remove the accessory drive belt.
  5. Remove the thermostat housing.
  6. Remove the roller followers.
  7. NOTE: You must retime the LH and RH camshafts when either camshaft is disturbed. Turn the crankshaft clockwise to position the number one cylinder at top dead center (TDC).
  8. NOTE: Late build pulley shown, early build pulley similar. NOTE: The special tool must be installed on the damper and should contact the engine block to position the engine at TDC.

Posted on Jul 24, 2009

  • 1757 Answers

SOURCE: timing marks for 2000 ford focus

Click on the following direct Link.
With the DOHC you will need the Camshaft Sprocket Holding Tool and Camshaft Alignment Tool.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2000/make/ford/model/focus/2000_ford_focus_timing_belt_diagram_marks.htm

Posted on Mar 19, 2010

BCAS1298
  • 3092 Answers

SOURCE: setting timing belt 2.0 split port focus engine

Hope this helps.

39fe2de.gif

Posted on Jul 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a ford focus timing marks single overhead cam diagram


depending on trans and engine mount type the mark my be on flywheel but generally most cars it is located on the belt pulley attached to crank rod, center bottom one on engine block. the timeing mark should be visable from top looking down. if you use a big ratchet to turn over the engine by hand and go slowly, you should see thhe marks pass as you do so.

Aug 14, 2014 | 2002 Ford SVT Focus

1 Answer

Timing marks for ford focus


http://www.automecanico.com/auto2002/avanzada.html

go and translate to english and see your model and execute.

God bless you

Sep 28, 2012 | 2006 Ford Focus ST

1 Answer

Timing marks for a 2001 ford focus 2 litre engine where are they and what does it look like


there is no marks!you need special knowledge and tools to timing a zetec engine.try a haynes service manual but is difficult!the cam pulleys sitting on cam shafts with conical joint!without any safe pin or tooth etc.the timing needs to lock the cam shafts and the crankshaft with two special ford tools!try to go on a good garage!!isnt so expensive.a ruined engine is the most expensive repair!

Aug 14, 2010 | 2001 Ford Focus

1 Answer

Need to install a timing belt on a 2002 ford focus with a 2 liter zetec engine cant find the timing marks


No marks to align camshafts, set crankshaft at TDC, align camshaft as shown, to align, lobs on cylinder #1 have to be pointing out at 45 deg, on the other end of camshaft's will be a slot on each one insert some thing through both as shown, to hold camshaft's in place.

0cca4f8.gifcb7ba5c.gif

Aug 05, 2010 | 2002 Ford SVT Focus

1 Answer

Can you show me a picture of timing on ford focus 1.8 tddi enduro di engine (cambelt)


there is not marks.you must have special tools to change the cambelt and retiming the engine.the camgears are conejointed in camshafts dont try anything!a haynes manual can help you but much better an experianced engineer must do this!the zetec engines are sophisticated with variable timing and complicated working procedure.

May 13, 2010 | 2001 Ford Focus

1 Answer

Timing marks for 2000 ford focus? can you time the engine with out the special tool? its a dual overhead cam


Click on the following direct Link.
With the DOHC you will need the Camshaft Sprocket Holding Tool and Camshaft Alignment Tool.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2000/make/ford/model/focus/2000_ford_focus_timing_belt_diagram_marks.htm

Mar 18, 2010 | 2000 Ford Focus

2 Answers

Timing belt slipped on 2003 1.6 focus need the timing marks


there are no timing marks as such on the focus mate you have to lock the cams with a setting bar (to do this you need to remove the rocker cover and lock the cams with a locking bar)
the crank is locked up by removing a plug behind the oil pump on the back of the engine (the crank needs to be at top dead center on number 1 cylinder and this can be done by removing number 1 spark plug and using a long piece of welding wire or screwdriver, place in to the cylinder and turn over until the piston is at the top)
with the cams locked and the crank locked your engine will be timed up
please let me know if this has been of any help
cheers
big mike :)

Dec 29, 2009 | 2003 Ford Focus

1 Answer

Need to find timing marks, on a 2003 ford focus with a 2.0


Ford Focus 2000-2005 2.0L

2.0L (VIN P) Engines

Fig. Align the timing marks before removing or installing the timing belt-2.0L (VIN P) engine
22b4677.gif


Fig. Crankshaft alignment position-Ford 2.0L (VIN 3) engines
f08e054.gif


Good luck (rated this help).

Sep 18, 2009 | 2003 Ford Focus

5 Answers

2000 ford focus twin cam timing


please helpme i need timing marks for ford focus 2000 16 valvs

Sep 11, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2001 Ford Focus Logo

Related Topics:

875 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...