Removal of headrests on backseat so the back of the backseat will lay flat
SOURCE: lightbulb replacement for 2000 Subaru outback wagon
all you need to do is remove the clip holding the washer fluid neck filler, once this is out of the way you can access the big gray backing that should have two wires coming out of it. just twist in the direction indicated and remove the cap, now you have access to the back of the bulb, remove the wires attatched to it and remove the metal clip that holds the bulb in place. now just put the new one in. You will see a small tab on the round part of the bulb, below the glass, align it right in the slot and put the metal clip back on and put the wires back on and backing cap and washer filler cap. P.S do not touch the glass on the new bulb, the grease on your fingers will prematurely burn the bulb out.
SOURCE: replace passenger mirror 1999 subaru outback
you need to remove door panel to unplug miroor connection
SOURCE: how to remove rear headrests in 1998 subaru legacy
You should be able to push the button and they come right out.
SOURCE: 2000 subaru outback trunck won't unlock/open
Is it a lift back or window and tail gate? Either way, there is a little hole on the inside for the escape hatch. Take a small pin, wire, coat hanger, push it straight in, it should pop the window, door, whichever, might be a small button over the hole, that way you can get the door lock fixed without smashing the lock off. I never tried mine , but I know all cars have them now. Check it out.
583 views
Usually answered in minutes!
×