Question about 1998 Buick Regal
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
first disconnect the battery then check how the serpentine belt is lined up so u can take it off and put back on. Then the pump should be on the side of the motor with 9or12 bolts there could be more! after taking out take razorblad and skrap the old gasket clean wipe of then put new gasket and pump back on dont over tighten the screws cuase the pump my be aluminum.
Posted on Mar 19, 2009
u can try replacing the relay. when u turn the key to the position right before starting position which is the position it would be in when u start a car and let off key because car started, well this is somting to try turn the key to position right before starting position have sombody listing down by fuel tank and see if tey can hear pump come on, try a couple of times to make sure they can hear, also the pump will only come on for about 2 seconds each time u put the key in that position, if u do hear the pump come on each time u do that that means pump is working if so u need to build up fuel pressure which could b anywhere from 20 to 60 pressure, to build up pressure u need to turn the key to same position turn key off turn key back to that position then off and do it like 50 times each time u do that the pump is on for only 2 seconds only building a half to one pound of pressure thats why u haft to turn key somany times to build it back up, if u try that and car keeps almost starting but doesent then u need to build up a little more pressure. NOTE make sure u have gas, also most electric fuel pumps will go out when turned on dry
Posted on Nov 27, 2009
The starter is on the underside of the transmission, there are wires feeding the solenoid (remove) 3 starter bolts (remove) pull off transmission/flywheel
Posted on Mar 19, 2010
SOURCE: replacing water pump on 2002
I haven't worked on the newer buicks but I play with alot of chevrolets and depending on the setup it maybe easier to pull the power steering pump bolts and lay it off to the side than it will be to pull the pulley of and press it back on. If you want to pull the pulley you will need a universal pulley puller available at most part stores, if the pulley has bolts in it you will remove the bolts and the puller will have bolts that will slide into the existing holes allowing you to remove the pulley.
Posted on Sep 23, 2010
Tips for a great answer:
Nov 30, 2016 | 2000 Buick Regal
Dec 22, 2013 | 2000 Buick Regal
Aug 09, 2011 | 2000 Buick Regal
May 02, 2011 | Chevrolet Monte Carlo Cars & Trucks
May 16, 2010 | 1995 Buick Regal
Mar 16, 2010 | 2000 Buick Regal
Apr 10, 2009 | 1993 Buick Regal
718 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: