Question about 2000 Chevrolet Blazer

1 Answer

Brake lights want work all other light do work, ive been told it may be the multi switch??

Posted by on

  • william tucker May 11, 2010

    have you checked your brake light switch; located behind the brake pedal? you'll have to get on yr "elbows" and look under dash where the brake pedal arm is mounted under the dash.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 109 Answers

Brake light switch is probably what they call it its located on or around the brake pedal

Posted on Jun 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights don't work on 95 crown victoria


Battery power is applied through 15A fuse 1 in the I/P fuse panel. It passes through the brake on/off switch and is routed through the multi-function switch to the stop lamps. When the brake on/off switch is closed, the stop lamps light. Possible failures include the fuse, the brake on/off switch, the multi-function switch, and the filaments of the multi-purpose rear lights.

Sep 08, 2012 | 1995 Ford Crown Victoria

2 Answers

I have a 98 f150 xlt. My left rear turn signal and brake light has stopped working but the running lights work on the same bulb. Ive replaced the bulb nothing, replaced the socket and nothing, even checked...


Have you checked the socket to see if 12 volts is reaching the socket for brake light citcuit? Probe the wires with a 12 volt test light probe (avail from any parts store for about $6)

Apr 13, 2012 | 1998 Ford F150 Regular Cab

1 Answer

All lights work excrpt the brake lights, is that controlled by the multi switch?


the brake lights have a brake switch on the brake pedal. they do not go through the multi function switch. Did you check the brake fuses, and if they are ok make sure you have power and ground at the brake lights.

Jan 20, 2011 | 1996 GMC Sierra

1 Answer

Malfunctioned; unplugged, plugged back in, seems OK. Yes?


In my professional opinion, you have separate problems (if your description is accurate and haven't left anything out). # 1, the high mounted brake lamp is not part of the multi-function switch circuit (it's separate) - ONLY BRAKE LIGHTS.
#2 the other problem could very well be the multi-function switch because it controls the tail lamp relay in the Engine Compartment Junction box (under hood electrical box). When the parking lights are turned on, that high mounted 3rd brake lamp is NOT supposed to come on. It should only come on when the brake pedal is depressed. My professional experience/opinion, you either have the wrong bulb (single filament) in one of the brake lamp sockets in the rear of the vehicle, or one of those dual-filament brake lamp bulbs is shorted internally. You can verify this by pressing the brake pedal and see if the dash/cluster lights come on.

May 10, 2009 | Hyundai Accent Cars & Trucks

2 Answers

Brake lights don't work


check the multi function switch. I hava a 96 chevy monte carlo and I had the same problem . I changed the multi function switch and the brakes lights now work. the rear brake lights run thru the switch on the turn signal circuit. try it and see.

Apr 22, 2009 | 2005 Chevrolet Colorado

2 Answers

My third light is working but brakes lights are not...i was told if switching the flashers on and off could knock possible dust off the circuits that could be making the problem happening


check the turn signal switch. The right and left brake lights go through that switch. you might need to repair it or replace it. does the signal lights work?

Jan 19, 2009 | 1995 Oldsmobile Cutlass Supreme

1 Answer

Brake lights???


cut the wires use the wire connector and reconnect to each other its a simple walmart has a set for 10 bucks to do this and put electrical tape around the wiring 2 seperate wire 2 seperate connectors/ Please rate my response thank you very much

Jan 16, 2009 | 2000 Chevrolet Tahoe

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...