Question about 2004 Dodge Ram 1500

1 Answer

2004 Dodge a/c problem

My 2004 Dodge Ram a/c turns on and turns off perodically. The control panel and the resistor have been replace and it still refuses to work.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 721 Answers

Check the pressure. It's probably low on freon. Write back with the info.

Posted on Jun 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 dodge Ram 1500 electrical manual? Heater quit working, fan not turning on?


fan motor relay is for fan speeds
heater and AC

blower motor has a resistor
did the motor bench test ok
if fan motorand resistor are ok
i suspect
a faulty on /off switch in the dash panel

i think that system has electronic directional flap actuators not vacuum ..if vacuum might be a leak ..4d2d0af7-5ca3-476a-86ab-3456f74cc675.gif

Mar 07, 2017 | Dodge Cars & Trucks

1 Answer

Location of heater fan resistor on 2004 dodge ram 3500 diesel 2wd


Please visit this YouTube link for a detailed explanation on the location and how to replace the resistor. http://www.youtube.com/watch?v=5Q2rM1pGw5k

Thanks,
Will

Dec 01, 2013 | 1998 Dodge Ram 3500 2WD

1 Answer

2006 Dodge Ram new blower motor and a new resistor but no power to the blower


Check the switch on the control panel, look for burned connector contacts and a melted connector shell, replace as needed.

Jul 12, 2012 | 2006 Dodge Ram

1 Answer

Blower on my 2004 dodge ram will not work on high. I have replaced the resister twice and the switch as well. When I had the fan hooked up to 12 volts at the parts store it seemed to work fine. Any...


Inspect the connector at the resistor, seen many melt due to faulty resister, if u have replaced resister u may have fix half the problem already, try wiggling the connector when the fan is on high.

Jun 10, 2012 | 2004 Dodge Ram 3500 Truck

1 Answer

Remove dash to get to sensore for blower on 2002 dodge ram 1500 the blower only works on high


If the blower motor is only running on high the problem is the blower motor resistor. location for resistor is behind the glove box. Remove all items in glove box. remove glove box from dash and to the left of the blower motor you will see a electrical plug, remove the plug and the resistor mounting bolts. remove the resistor and replace it with new resistor. reinstall all items as you have taken them off. hope this will help you.

May 12, 2010 | 2004 Dodge Ram 1500

1 Answer

Blower goes on and off ,mostly only runs when in park for a 2004 dodge ram


check the blower resistor and the wiring at the connector to resistor its located next to blower motor, they have problems with the connector to risistor bruning and melting, il bet that your problem , start there good luck.

Nov 14, 2009 | 2004 Dodge Ram 1500

2 Answers

Blower fan will not come on dodge ram 1500


This could be a few things. First check to make sure that your fan relay is still good. (This will be in your control panel under your hood) Otherwise, your fan switch could be out. Try removing the control panel and the switch that attaches to behind the fan control knob and replace with a new one. Lastly, if your fan works on "high" but not for "low" or "medium" then it is most likely your blower resistor module. If I remember correctly the resistor is located behind the glove compartment. Let me know how it goes and if you need some more help. Good luck!

May 24, 2009 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...