Question about 2004 Ford E150
Electronic sofa seat was working fine. It stopped working all the sudden when the stepson and friend used the van. Checked fuses, power to the circuit board, nothing. Sherrod, which is NO help, mentioned the circuit breaker fuse in the fuse panel. Still Nothing. What else could it be?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I just bought a 93 GMC Safari Van and couldn't figure this out either. Luckily, I did have the manual. It appears that the lever under the front of the sofa moves in forwards and backwards. There is a lever on the corner of each side. Lift up on each and pull cushion forward. Also, you can push on the back of the sofa to help it go down. Hope this helps!
Posted on Mar 13, 2009
I just had the same problem. If it is a regular van try under the driver seat in a plastic box. If it is a conversion van try in a pannel just behind driver seat on side of van wall behind a pannel that looks like a vent.
Posted on Apr 09, 2009
SOURCE: power windows don't work
I had the same problem. There was a wire broken into where the wires go from the door to the inside of the cab. There is a rubber boot over the wires that you have to take loose to see the wires. I changed fuses, checked switches, and relays but i finally found the problem. I hope this helps. DVPNN
Posted on Apr 13, 2009
Obviously power is being drawn by something, perhaps motor is stuck, shot , or switch is faulty. If you can get to motor wires & test for voltage, even by poking with a test light. There should be no voltage to motor on either wire, until switch is pushed. It will supply voltage to 1 wire, then the other, when switched to opposite direction. just reverses polarity. The switch may be faulty & supplying voltage to motor, and telling it to rotate in direction that it has already went as far as it can.
Posted on Apr 26, 2009
Tips for a great answer:
Aug 05, 2015 | Cars & Trucks
Feb 11, 2014 | 1994 Chevrolet G20
Apr 17, 2013 | 2000 Dodge Caravan
Mar 30, 2013 | Cars & Trucks
Feb 23, 2010 | 1992 Dodge Ram 250
Mar 21, 2009 | 2005 Scion xA
Dec 28, 2008 | 1987 Chevrolet G20
Oct 15, 2008 | 1998 GMC Safari
1,138 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: