Question about 2004 Dodge Caravan

1 Answer

Driver light out how to replace bulb need special tools?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 2,984 Answers

Headlight Bulb Removal & Installation To Remove:

  1. Disconnect and isolate the negative battery cable.
  2. Remove the headlight assembly mounting screws.
  3. Pull the assembly forward and disconnect the bulb connector.
  4. Turn the bulb retainer ring counterclockwise and remove the bulb from the headlight assembly.
To Install:
NOTE: Do not handle the glass portion of the bulb with your bare fingers.
  1. Install the bulb in the headlight assembly.
  2. Install the retainer ring.
  3. Connect the connector to the bulb.
  4. Install the headlight assembly in the vehicle.
  5. Connect the negative battery cable.
No special tools required.

Posted on Jun 24, 2009

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Molson02536
  • 3854 Answers

SOURCE: Do I need special tools to replace spake plugs on

Super easy to do but I wouldn't replace the wires unless you know one is malfunctioning (very rare and the stock wires are fine 100k+). For the plugs I'd recommend not going with the bosch plugs, if you really want platinum pick up a set of the ngk or the factory delcos (ngk makes the oem plugs). Here are some part #'s, you can just call a napa with the stock # and they should have them, I'm guessing you have a 00+ tahoe with a 4.8/5.3? They all work the same for any of the lsx truck motors.
2003 CHEVROLET TAHOE 5.3 V8 T FI
Spark Plug_________Part No.____Stock No.___Plug Gap 
V-Power___________TR5_______2283______.040 
G-Power___________TR5GP_____3186______.040 
Laser Platinum______PTR5D-10___3784______.040 
OE Laser Iridium_____ITR5F13____6044______.040 
Iridium IX __________TR5IX______7397______.040

Plugs are really easy to do, just get a few angles and a few length extensions for a 3/8" ratchet and it will be done in no time. Take your time and be careful not to drop the plugs make sure you screw the plugs in by hand first, and after a couple of turns you can put the socket/wrench on there.

Good luck and hope this helps. 

Posted on Jul 06, 2009

Davaith
  • 56 Answers

SOURCE: trying to replace light bulbs, front and rear

No usually for GM vehicles there are two pins on the headlight that you pull out and up. they are L shaped upside down. If not there are bolts holding the headlights on. But no special tool needed, it is a simple job, once the headlights are off twist the bulb counter clock wise, if they have a notch depress it and remove the bulb unhook it from the harness and you are done. Installation is reverse of removal.

Posted on Jul 16, 2009

john631068
  • 172 Answers

SOURCE: are there any special tools needed to relace the

Yes you need fuel line disconnect tool the easy ones to use are like this and they are cheap to buy .....heres a pic of what the tool looks like hope this helps....
19b64d7.jpg

Posted on Nov 20, 2009

steve_e_uk
  • 1675 Answers

SOURCE: How do I Replace headlamp bulb on 2006 C230 Benz?

hi here is a brakedown of the head light http://www.detali.ru/cat/oem_mb2.asp?TP=1&F=211006&M=646.961&GA=722.699&GM=716.649&CT=F&cat=64U&SID=82&SGR=210&SGN=08


i gather you are having trouble with part 110?all you have to turn this in an anti clockwise direction, its a bit awkward to do but its doable, no special tools are required for this, just hand power...hope this helps

Posted on Feb 10, 2010

MNfisherman
  • 11896 Answers

SOURCE: 1. my 96 ford windstar's tail lights dont work,

If tail lights don't work, check your dimmer switch for any shorts. If the brake lights don't work, then check the brake switch behind the brake pedal. You can test them with a multitester.
For brake shoes you need socket or star wrench, and needle nose pliers for the springs unless you have a spring too. If you have disc brakes, then socket set and a c-clamp to push the pistons back in.

Posted on Sep 03, 2010

Testimonial: "thank you for the feedback; I really thought you guys were going to try to milk me for some cash"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I remove the black clips holding the trunk lid liner in place? Need special tool?


their is a special tool or you can carefully use a screwdriver to pry hem off

Aug 12, 2015 | 2003 Lexus ES 300

1 Answer

Replace headlight, what is the bulb number, and tools required, also what needs to be done to get to the light.


If you go to the local parts store like advanced auto they can tell you which bulb you need. They usually install from the rear and do not require special tools. Lee

Jan 04, 2011 | 2009 GMC Acadia

1 Answer

How to replace passenger taillight assembly on 2007 RAV 4 will I need to remove inner body panels, and if so do I need special tools?


remove your tail light lens assembly using a screw driver slide the lens and lift it off then push and slightly turn the busted bulb to remove.

Apr 07, 2010 | 2007 Toyota RAV4

3 Answers

Back up lights do not work on 2001 Saturn SL2. All other lights work fine.


If your bulbs and fuse are good, then you will need to check the switch located on the side of the transmission. It will have several wires coming out of it. This switch controls your reverse lights

Oct 26, 2009 | 1993 Saturn SC2

1 Answer

Trying to replace light bulbs, front and rear


No usually for GM vehicles there are two pins on the headlight that you pull out and up. they are L shaped upside down. If not there are bolts holding the headlights on. But no special tool needed, it is a simple job, once the headlights are off twist the bulb counter clock wise, if they have a notch depress it and remove the bulb unhook it from the harness and you are done. Installation is reverse of removal.

Jul 06, 2009 | 2003 Pontiac Montana

1 Answer

How to replace brake light in rear window. do I go in from the truck or rear seats? Do I need any special tools?


The housing should jump pop up using a screw driver. Push the bulb down and twist out.

Jun 27, 2009 | 2001 Lexus LS 430

1 Answer

The radkio and cd works but light does not work anymore is it a fuse


there is a tiny light bulb inside the radio that illuminates the radio face plate, pull the radio out (u need a special tool set, it is made by KD tolls) remove the top cover of the radio and u will find a tiny twist in bulb socket, twist that out and replace the push in bulb.

May 26, 2009 | 1998 Ford Explorer

1 Answer

Front, right turn signal needs replacement


if you take out the bulb turn lights off so you don't short out anything, then you spread out tewrminals to make better contact with bulb.

Apr 25, 2009 | 2000 Lexus ES 300

1 Answer

How to Change the headlight bulbs for my 1992 Buick Regal


A torque bit screw driver are a philips screw driver should be all you need. JUST MAKE SURE NOT THE TOUCH THE BULB (new bulb) WITH YOUR FINGERS. Your body oil will make the bulb burn out quick!!!! Wear rubber gloves when installing the new bulb. f one is dim, you better change both sides. are the other side will also be dim.

Feb 06, 2009 | 1992 Buick Regal

4 Answers

2002 Jetta Brakes


On one of the front driver side pads there is a sensor for low pads. He either did not hook it back up or got a lose connection to it.

May 29, 2008 | 2002 Volkswagen Jetta TDI

Not finding what you are looking for?
2004 Dodge Caravan Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...