Question about 2002 Chevrolet Monte Carlo

Open Question

2001 Aztec idle high around 2500 rpm

Why does my 2001 Aztec idle high around 2500 rpm and if you turn it off then back on it's okay?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
bibleman01
  • 334 Answers

SOURCE: idle too high on a 06 cobalt

when you clean it make sure that you hold the butterfly open so you can get the spots clean that need it. If there is anything in the way the butterfly will not close. Just a small bit of dirt will do this .

Posted on Dec 26, 2008

Ad
  • 150 Answers

SOURCE: idle at 1500 to 2000 rpm

Most likely the throttle body gasket (between the throttle body and the intake manifold) is leaking.

Posted on Feb 12, 2009

  • 1 Answer

SOURCE: Aveo 1.5 L engine, RPM is high and reaches 2500 at idle speed

you may try to isolate the TPS and IDLE and MAP inputs from the fuse box make a direct connection from control ouput to the fuse box this operation will require a professional technical
you may feed me back if it works

Posted on Apr 11, 2009

  • 13 Answers

SOURCE: I have a 1994 chevy pickup, 2500, witha 5 speed

what engine would be more helpful. but just guessing i would say the engine is just tired and rings are worn and valves arent seating and you have a vacum causing the high idle from nothing seating properly.

Posted on Apr 07, 2010

leedavidian
  • 1420 Answers

SOURCE: Hello My 1988 Chevrolet S-10

what happen rejection? Lee

Posted on Nov 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

'99 silverado 5.3 engin will not idle runs at 2500 rpm and drops down to 1000 rpm the back up to 2500 rpm -------------------------


which car is it?

problem with 1993 Geo Prizm '99 silverado 5.3 engin will not idle runs at 2500 rpm and drops down to 1000 rpm the back up to 2500 rpm -------------------------

Apr 15, 2013 | 1993 Geo Prizm

1 Answer

After doing a full tune up (gaskets and all) now my 2001 montero sport idles at 2500 rpm's


What is your definition of a tune-up, besides
spark plugs?

Did the 2500 rpm idle start,after someone worked on it?

I hope a repair shop didn't give it back to you like that

Mar 08, 2013 | Cars & Trucks

1 Answer

01 BUICK LESABRE IDLES HIGH THEN IDLES LOW WHEN STARTED


its probably a vacuum leek check pvc line oil eats the rubber line and it cracks

Jan 14, 2013 | 2001 Buick LeSabre

1 Answer

Water logged my car & now it idles very high around 3000 rpm & wont drop unless you tap the gas


go to the test with scanner and computer for exactly diagnostic, otherwise you must waste time and money.
God bless you

Sep 18, 2012 | 2001 Pontiac Grand Am SE

2 Answers

Hyundai Sonata 2002 idle at high RPM and accelerate 40-45 MPH


Look for a vacuum leak somewhere. This is the most common problem for a high idle.

Jun 23, 2009 | 2001 Hyundai Accent

1 Answer

Honda Accord 1991 idles high then low


)The fact that thge engine idle fluctuates when it is cold indicates that the Fast Idle THermo Valve is out of adjustment.
This valve is located ot the front of the intake manifold on the driver's side just below the accelerator cable. To adjust it, wait until the engine is cold (best to do it first thing in the morning).
Remove the two screws holding the cover on and start the engine. There is a brass needle sticking up through a plastic ring that has two slots in it. With the engine idle fluctuating, use a thin flat blade screwdriver to SLOWLY turn the ring CLOCKWISE
until the idle stabilizes. Once done. put the cover back on withg the two screws and you should be done.

Jun 04, 2008 | 1991 Honda Accord

Not finding what you are looking for?
2002 Chevrolet Monte Carlo Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...