Torque specs on camshaft of 2002 Hyundai Accent GL 1.6L

SOURCE: 2002 hyundai accent needs brakes

hi from uk to renew front disc(rotors) and brake pads on the accent are not beyond the mech minded diy er and can easilly be done if you follow instructions on the haynes manual etc and would save$$$$s in dealer charges ? if you diy as for the rear brakes they are drum brakes with shoes that are auto adjust but again can be done by diy with help of manual ? as for cost of parts ? you can obtain/price of all parts from good auto shop/superstore also a manual ? then by all means obtain a quote ? for local garage to do the brakes with cost of labour and parts ? then consider option of diy? i am sure you will be tempted/inspired if you browse the work involved hope this helps? contact again if you feel lucky? will be glad to assist if you get stuck? or req info ? merry xmas from uk

SOURCE: looking for torque specs on a hyundai accent gl

1. 
   
2. For 3.0L engines, tighten head bolts in sequence to 76-83 ft. lbs. (105-115 Nm).
3. For 2.5L engines, tighten the bolts in sequence as follows:
   1. Step 1: 18 ft. lbs. (25 Nm).
   2. Step 2: Plus 60-64 degree turn.
   3. Step 3: Plus 45-49 degree turn.

SOURCE: need torque specs for connecting rod and main

Torque in two to three stages.
Connecting rods are 24-26 lb.ft.
Main bearing caps are 41-44 lb.ft.
Hope this helps,Chuck

Testimonial: "Thanks for the help Chuck"

SOURCE: torque specs.for hyundai accent? need to torque

step 1 26 ft lbs.

step 2 additional 90 degrees

step 3 loosen all bolts one full turn

step 4 26 ft lbs.

step 5 additional 90 degrees

SOURCE: NEED TORQUE SPECS AND SEQUENCE FOR 02 DODGE 2.4 V6 STRATUS

How do I know how to put the torque converte on the same holes like it was be fore to the fly wheel