1991 Volkswagen Jetta Logo

Related Topics:

A
Anonymous Posted on May 21, 2014

How to change alternator belt for 2007 vw jetta

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Feb 20, 2009

SOURCE: 2003 VW Jetta Charging problem

problem is that the voltage regulators on the 1.8t which I am sure is the same on the TDI alternator....is that they may work fine when they are cold....but once they warm up is when they start acting up and causing problems. I assume is has to do with some resistor over heating. This is just a common problem noticed by most people over at VWvortex.com.
So you can take your alternator to get tested but if it is tested cold then well it may appear to be working ok. When in reality it is broken. Trust me...it is a cheap enough part and easy enough to fix to not just try it. Some can even change the regulator without taking the alternator out. If you have small enough hands I can see it being done.

Ad

Anonymous

  • 1 Answer
  • Posted on Oct 29, 2009

SOURCE: Do you need a special tool to change the rear

yes, you need a special tool to screw the brake piston back into the caliper housing. this is do to your disc brake set up. tool is available from harbor freight at around 40 dollars.

Anonymous

  • 2317 Answers
  • Posted on Mar 14, 2010

SOURCE: how to tighten power steering belt on 1990 vw jetta

You have to get to it from under the car. Remove the plastic cover piece. There are 5 bolts that need to be loosed to tighten the belt. The bolt at the top of the bracket, the two pivot bolts going into the pump, 1 bolt that is up in the rear bracket of the pump, (bracket bolts to the block) and the bolt that holds the tensioning adjusting bolt on the front of the pump bracket. Turning the long bolt adjusts the position of the pump. All bolts should be 13mm head bolts. The "hidden" bolt on the back bracket xan be reached by using a deep well 13mm socket and a 3 inch extension. The others with a wrench or socket.

Ed Paje

  • 632 Answers
  • Posted on Jun 13, 2010

SOURCE: P1176 2000 VW JETTA ALREADY CHANGED THE 02

17584/P1176/004470 - Bank1: O2 (Lambda) Correction Behind Catalyst: Control Limit Reached Possible Causes

  • Intake Air System leaking
  • Oxygen Sensor(s) and/or Oxygen Sensor Control faulty
Possible Solutions
  • Check Intake Air System for Leaks (False Air)
  • Check Oxygen Sensor(s) and/or Oxygen Sensor Control (all of them!)
This is the pre 02 sensor located before the catalytic converter.

Anonymous

  • 1 Answer
  • Posted on Mar 06, 2011

SOURCE: 2007 Jetta 12V Outlet Issue - Which Fuse?

My 12V outlet went out and of course looking at my manual it was not giving the right location. After trying the different empty slots I discovered that the 12 V outlet fuse for my 2007 VW Jetta Wolfsburg was 6 rows down and 3 slots over. I hoped this helps someone else from the headaches of searching for it

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My vw beetle 2.0 2002 fan belt snap i dont have sample any one can help me with a size of the belt

The snapped belt has a number mark.

How To Install Replace Engine Serpentine Belt Volkswagen ...

? 6:09
https://www.youtube.com/watch?v=urBVruIk348
Dec 31, 2011 - Uploaded by 1A Auto Parts
How To Install Replace Engine Serpentine Belt Volkswagen Beetle 1AAuto.com ... Well, the serpentine belt on my Bugbroke. And, didnt know ...

Help! Serpentine belt broke, need advice. - TDIClub Forums

https://forums.tdiclub.com/showthread.php?t=323672
Jul 11, 2011 - Basically, I think the serpentine belt blew on her, she drove about 1/8 ...TDI(s): 2005 Passat Wagon, 2004 Jetta,99.5 Golf ... BTW, last year I lost my AC belt rather abruptly. .... 2005 VW Passat GLS TDI (Chipped, BSM delete, and Manual ), 2007 VW Eos 2.0T, 2002 Mazda MPV ES, 2015 Toyota Sienna XLE. 1.6 tdi alternator belt tensioner bolt snapped
Dec 29, 2013
Serpentine Belt Tensioner (A4 ALH) Keeps breaking!!!!!!
Jul 29, 2013
Serpentine belt tensioner?
Sep 17, 2012
ALH Serp. Tensioner Damper Failure w/ pics and video
May 21, 2011
More results from forums.tdiclub.com

VWVortex.com - Broken timing belt, valves likely bent

forums.vwvortex.com > ... > Golf IV & Jetta IV

0helpful
1answer

How do I change the alternator belt on my1990 vw diesel jetta

as the alternator IS the adjuster for the tension of the belt,it is a simple task of undoing the alternator bolts/nuts and pushing it inwards to fit belt,then pull it outward to tension belt to correct tension...
2helpful
1answer

I need a diagram routing for a serpentine belt in a jetta 2007

The diagram routing for a serpentine belt in a VW Jetta 2007, 2,0 FSI engine.
See picture below:

0a3cd9e.jpg
CS = Crankshaft
F = Fan pulley
Gen = Alternator
T = Tensioner
AC = Air Conditioning
PAS = Power Assisted Steering
WP = Water Pump
0helpful
1answer

Windshield wipers on 2007 VW jetta not swiping

wiper gears may be broken, got to junk yard and buy motor and gear assembly for windshield wipers, should only take an hour to change out.
0helpful
1answer

How do I add transmission fluid to a vw jetta 2007

on a 2007 VW Jetta with a 2.5 engine. How do you refill the transmission. After draining the pain, cleaning it ,changing the filter and reinstalling the pan. I can not find a way to check the fluid level or to refill the pan to the proper level.
1helpful
1answer

2004 jetta - clicking noise left side of engine compartment. Car runs fine, starts fine. Belt problem?122,000 miles original parts.

Could be sepentine or timing belt.
More than likely a tensioner for serp belt or timing belt. It could also be the pulley for the alternator - a pretty common problem for VW's.
0helpful
2answers

Why does my paid off 2000 VW Jetta GLS make a high pitch buzzy grinding sound. Is it the alternator ,transmission,or timing Belts. What do I do and how mauch can it run me. Am I still covered with the

The trick is to take off the belt and spin the different things and see if any of them make the noise you hear.
Water pump, alternator, power steering, air pump, belt tensioner pulley. You could also briefly (30 seconds) run the engine without the belt and see if it still makes the noise.

For prices, you can check autozone.com or partsamerica.com
0helpful
1answer

Tring to install an alternator belt on a 1988 VW cabriolet. In order to install the alternator belt i have to remove the starter belt, which is on the outside pully. The alternator belt is on the inside...

the air conditioning compressor is driven by the crank and that drives tha alternator. you have to take off all the belts in order to change the alternator belt.
1helpful
1answer

1986 VW Jetta alternator belt installation

how do you remove a alternater belt on a  jetta
Not finding what you are looking for?

125 views

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Bradley
Bradley

Level 2 Expert

105 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...