Question about 1996 Ford Taurus

1 Answer

1996 Ford Taurus power hesitation

On the highway at about 2000 RPM the car hesitates/dies a little. After I depress the accelerator to maintain speed, the problem eventually clears and power restores. We are getting codes p0171, p0172, p1408 and p1132. It dosen't appear to be throttle position based as it occurs at various throttle positions. I have read it might be the mass airflow sensor but I have disconnected the MAF sensor and there appears to be no change.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 453 Answers

If you disconnected the Mass air flow sensor the car should have die out at idle. Check fuel pump pressure at the fuel rail should be 30 psi at idle. Low fuel pressure will cause your po 171, 172, problems which could cause the other to problems. You might be needing a fuel pump and filter.

Posted on Jun 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I start my 1996 Honda accord the engine seems to sputter rpm gauge revs up on its own and spits and sputters as I'm driving down the road


My sputtering & stalling 1993 Honda Accord - YouTube

? 2:12
https://www.youtube.com/watch?v=Ki2H9aq8Xis
Jun 23, 2011 - Uploaded by mdpbfly
My sputtering & stalling 1993 Honda Accord ... 1996 Acura Integra, hesitation accelerating & misfire. ... 1993 Honda Accord Start Up and Review 2.2 L 4-Cylinder ... SIR B16A Engine sputter/ power loss at higher RPM - Duration: 1:14. by ... 1994 Honda Civic Check Engine Light Code Retrieval Tutorial ...

All comments on How To Solve Honda Idle Problems ...

https://www.youtube.com/all_comments?v=L788jKEVblY
What should I do if once I turn on my Ac my idle drops as if it's gonna die, and .... to a complete stop the rpms start going up and the car accelerates on its own. ... Honda Accord LX, and my Honda just started sputtering in idle. check engine .... My cousin replaced my radiator on my 90 civic and since then my temp gauge is ...

Acceleration Bog/Sputter/Hesitation - Honda-Tech

honda-tech.com/honda-accord.../acceleration-bog-sputter-hesitation-279...
Jun 11, 2010 - 1990 Honda Accord Ex F22 209000 miles, recent alternator change When I ... When I take off from a stoplight I get a little hesitation/bogging/sputteringfeeling until about 2,000 RPM then ... My 1999 Accord had a similar problem (F18B2engine). ... It only lasted a second or so before it would actually rev up.


Dec 28, 2015 | Honda Cars & Trucks

1 Answer

1997 ford Taurus idles but hesitates on acceleration


What does the scan tool data tell you at idle,at 2,500
and on a road test ?

Is the exhaust converter blocked ?

2,000 Rpm--what is that about ?
Trans Slips ?

Feb 28, 2014 | Cars & Trucks

1 Answer

My 05 taurus hesitates at cruising i am thinking fueling problem


2005 Ford Taurus maybe needind a recalibration of the ECM.For lack of power at highway speed,Misfire at load?low RPM also,The operation of a fuel pressure sensor is to limit voltage to the fuel pump when certain amount of fuel is not needed,and increase voltage when fuel is needed.If anything you need a recalibration of the ECM.

Aug 11, 2012 | 2004 Ford Taurus

1 Answer

Hard start and engine hesitation at highway speed


The PO441 has to do with your HO2S 2 (Oxygen sensor). You need to check to make sure the wire is not off of the sensor and check the grounds to the Oxygen sensor. Could be a bad Oxygen Sensor. The other code has to do with your Evap system Purge solenoid circuit. Has to do with detecting an improper voltage level. Could be a shorted Purge solenoid.

Sep 11, 2009 | 1997 Chevrolet Monte Carlo

3 Answers

87 T-bird hesitating


have you cleaned the air filter?

May 18, 2009 | 1987 Ford Thunderbird

1 Answer

1996 Mazda 626 4 cylinder fuel pump?


Have the fuel psi check before you change pump,check air filter and spark plugs .

May 18, 2017 | 1996 Mazda 626

Not finding what you are looking for?
1996 Ford Taurus Logo

568 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5579 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...