Question about 2005 Chevrolet Silverado 2500HD 2WD

1 Answer

2005 Chevy 2500 6.0 V8 will crank but won't start

It has happened on 2 seperate occasions. I turn the key and it cranks but won't start. Scanned it and have no codes. I let it sit and try it after 30 minutes or so and it will start. Could somebody help diagnose it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,036 Answers

Clogged air filter can make a car hard to start also.leaking fuel injectors flooding out engine.after turning off.take a fuel pressure gauge hook it up.turn ignition on .dont start engine.let your fuel pressure build up.55-62 psi.then turn off ignition.if fuel pressure start leaking down.your fuel injectors are leaking. if they dont leak. you have problems in the ignition system.

Posted on Jun 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 jeep liberty will not start on occasion battery and alt have been checked they are good what might the probeem be


When you say it won't start do you mean nothing happens when turning the key car won't turn over if so then more than likely your starter is getting bad and when the starter quits spinning it probably stops on a bad spot on the brushes and looses it's connection if that's the case next time vet someone to turn the key while you take a hammer and hit the starter right on the side of the body don't hit the solonoid but if it starts right up then it's the starter going bad replace it.

Sep 18, 2017 | 2005 Jeep Liberty

1 Answer

I HAVE A 6.7 CUMMINS THAT WONT CRANK WHEN YOU TRY TO START IT. WHATS WRONG WITH IT?


You need to take it in and have it scanned for fault codes, that is the first step in repair of this problem.

Oct 05, 2016 | 2008 Dodge Ram Pickup 2500

1 Answer

I have 1995 chevy s 10 won' start. I like to try hot wire.crank but will not start.help me??


Won't start how ? no crank - no start , which means when you turn the key to the start position nothing happens , starter doesn't engage. Or the starter turns the engine an it doesn't start an run. a crank - no start ?

Nov 20, 2015 | Chevrolet S 10 Cars & Trucks

1 Answer

2009 Chevy 2500 cranks but won't start


gas? diesel? if its a 6.0 gas they have problems with the crank sensor. check for fuel pressure and spark. read the computer codes. probably crank sensor or fuel pump

Mar 16, 2013 | Cars & Trucks

2 Answers

My 2005 chevy impala won't start since someone broke into my car


i would say when the person broke into your car they set off the security system which stops the car from starting, the way to reset the security is to put your key into the ignition turn the key until all the dash lights come on and let them stay on about 15 minutes after the 15 minutes have expired turn the key off and wait about 3 seconds and then your car should start. hope this helps.

Jan 29, 2013 | 2005 Chevrolet Impala

1 Answer

2005 Chevy Aveo cranks but won't start.


Chevrolet Aveo 1,6 LS won't start just cranks crank angle sensor ok and coil ok

May 14, 2012 | Chevrolet Aveo Cars & Trucks

1 Answer

I have a Chevy 2500 pick up truck. My son thought he'd replace the spark plugs. He removed the distributor cap, didn't understand it and now the truck won't start. He did not replace any spark...


firing order for 5.7 v8 is 1-8-4-3-6-5-7-2 mostly all of the chevy v8s are the same firing order. the rotor button in distributer turns clockwise, the cylinder numbers are 1-3-5-7 on drivers side, 2-4-6-8 is on passengers side. To get started get your distrutor cap[new one] look on the top you will see a #1that's where you begin you must know if if rotates clockwise or counter clockwise start in that direction then follow the firing order and cylinder line up. good-day!! if cap is not marked, just pull out #1 plug, put a straw or similar in plug hole on top of piston. turn engine over by crank in front of vehicle with a wrench, when the piston comes to the very top just before it starts going down. this is tdc. and rotor button should be pointing to #1 wire on dist, cap. follow from there. good-day !!

Aug 09, 2011 | 1994 Chevrolet Silverado 2500

1 Answer

Francois Silver ? Walvis Bay - Namibia I have a 97 Chevy K2500 Cheyenne V8 fuel injection. I have a starting problem. When turning the ignition key, the fuel pump comes on and stops after 2 to 3 seconds....


It has nothing to do with ECU and immobiliser even if you turn your ECU OFF your car will start and will your but not properly without CPU your car will work in emergency mode. try finding Idle sensors and check them if they are ok

Jan 29, 2010 | 1997 Chevrolet C/K 2500

Not finding what you are looking for?
Cars & Trucks Logo

685 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...