Question about Cars & Trucks
The unit should power up, even without the antenna connected. You likely have a wiring fault or a defective unit.
Posted on Jun 11, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 96 Nissan Maxima Radio Antenna
The gears are going out in the motor. If the antenna goes up and down, then the gears have corrosion. If it does not move....then the gears are toasted or the antenna cable inside the housing is broken.
Posted on Mar 28, 2009
jorgeva: on the driver's side to gain access, you must remove the air cleaner assembly. At that point, you can see the back of the light which has a plastic cap. Rotate this "counter clockwise" and you can pull it back from the back of the lamp housing. From there you will see how the bulb it self is plugged in, which is obvious. Unplug it. There is a "spring "like latch retainer to hold the bulb in place. Unlatch it, remove the bulb and install the new bulb.
CAUTION!!!!!!! DO NOT TOUCH THE GLASS AREA OF THE NEW BULB! Only handle the rear section. Reassemble in the reverse order.
The right side will require the removal of the windshield washer tank.
I trust this will have answered your question. If you would, let me or FIXYA know if I have solved your problem......
Posted on Apr 18, 2009
SOURCE: 1996 Nissan Maxima oxygen sensor
hye there ,,there are 3 o2 sensors on your car,,one for each bank,,,and the 3rd sensor is located after the cat this one usually goes first,,,,just make sure you no if your cars an import or not as they can be different,,,then you should be safe when ordering ,,hope that helps,,,
Posted on Apr 24, 2009
just push up on the clock part you wont break it, the pull down once it pops. unplug defroster and clock and caution lights.then put the car in 1st gear and pull up the trim around the shifter, unhook the cig lighter then unscrew the ash tray and unplug the light. then there should 4 more screws two on top two on bottom. and there you go
Posted on Feb 11, 2010
Tips for a great answer:
Feb 03, 2016 | Nissan Cars & Trucks
Jun 24, 2015 | Nissan Cars & Trucks
Apr 04, 2014 | 1995 Nissan Maxima
Nov 05, 2012 | Cars & Trucks
Jul 10, 2017 | 1995 Nissan Maxima
Aug 26, 2010 | 1986 Nissan Maxima
Jan 26, 2010 | 1994 Nissan Maxima
Dec 08, 2009 | 1990 Nissan Maxima
Jul 09, 2009 | 1997 Nissan Maxima
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: