Question about 1991 Toyota 4Runner
I have a 1991 Toyota forerunner 6 cyl. 4WD
The dipstick in near the power steering pump, it has a yellow handle on it.
Posted on Jun 05, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
these cars have problems with bad oil pressure warning switches you may have someone put an oil pressure gauge on the car and make sure your pressure is within spec and go ahead and change the sender if it checks out please rate -jeff
Posted on Sep 01, 2008
SOURCE: 1991 toyota 4 runner water pump
Ok, I haven't worked on a toyota four runner but im sure its closely related to some domestic SUV's I have worked on, First go to any auto parts store and buy your own water pump, It cheaper and wont cost you as much, for the timing belt also get it yourself, but you will need someone to correct the timing for you unless you mark the original places or have an timing belt gun, but you will have to remove the Fan, and harmonic balancer most likely, Oh go to the auto parts store and get a Chilton's manual to your nehicle cause it will guide you through the steps better than I can, You may have to drop the radiator, There possibly might be a timing belt cover so remove it and the timing belt itself cause the water pump is directly behing the belt, replace pump and timing belt,"also you will need a sealant for the water pump", then replace the parts you have taken off, For the hramonic balancer you will need a special tool to remove it so ask for it at your local Auto Parts store, I hope this is somewhat of help to you, Trying to make it as cost efeective as possible!!!
Posted on Sep 17, 2008
SOURCE: where is the oil pressure
Oil Pressure Switch On your 1991 Toyota Cressida 3.0L FI , the Oil Pressure Switch is located: Under hood, passenger side, lower engine area, front of oil filter, mounted in engine block David
Posted on Jan 12, 2009
On a 4 cyl., under hood, mounted on lower center passenger side of engine.
On a 6 cyl., under vehicle, passenger side, below seating area, passenger side of transmission,mounted on frame.
Posted on Jan 26, 2009
Tips for a great answer:
Mar 04, 2015 | Toyota T100 Cars & Trucks
Feb 03, 2011 | 1991 Toyota Pickup
Jan 08, 2011 | 1991 Jeep Wrangler
Mar 10, 2010 | 1999 Ford Explorer
Feb 28, 2010 | 1995 Toyota Camry
Oct 06, 2009 | 2004 Saturn VUE
Feb 02, 2009 | 1991 Ford Tempo 4 Door
Jan 26, 2009 | 1991 Toyota Pickup
Jul 15, 2008 | 1990 Toyota Cressida
65 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: