Question about 1999 Chevrolet Tracker

Open Question

Need to see a photo of the engine ground wire

I am having an electrical problem with my tracker, I replaced the battery cables and when I went to charge the battery the engine ground wire burnt up. I need to see what it looks like.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
duane_wong
  • 6826 Answers

SOURCE: 1995 k1500 pickup,replaced battery and

]Bad starter probably.
I would replace it.

Posted on Jul 04, 2010

Ad
  • 4793 Answers

SOURCE: I have a 95 chevy lumina. this morning my wife

if the wire is not connected to the frame or to the terminal correctly it will get hot or even burn the cover off,make sure both ends are metal to metal and tight,then cover in silicon jelly to stop the air getting to the metal and rusting (which will also cause a bad contact.

Posted on Jan 28, 2011

airjer995
  • 5332 Answers

SOURCE: hello, i checked the wires

You have three other coils that are working. If you test the brown wires on those (brown/whit, brown/yellow, brown black) and the test light flashes than your on the right track with the bad PCM. You should see a flash or pulse with the test light as the PCM turns the ground on and off to trigger the coil.

If it where wiring (brown wire shorted) than it would burn up as soon as you turned the key on.

Posted on Mar 20, 2011

  • 52 Answers

SOURCE: After extended city driving, get

sounds like you may have a bad caytalatic convertor they will have a bad odor and put a lot of back pressure wich will cause bad fuel mixture and poor power but when you let it sit it will clear up ,pressure will reside and 02 mixture will coorect its self,hope you can use this.

Posted on Jul 05, 2011

Zim1308
  • 543 Answers

SOURCE: Re 1999 tracker, 1.0 engine,

Would you say that is is more like a mechanical smell, like the smell of carnival machinery?

Posted on Jul 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I replaced alt and it only charges at idle and not at all if headlights are on


You have replaced the alternator because? Did you check to see if it was any good before you replaced it? The charging rate is controlled by a regulator either in the alternator or in the ECM. The connections in the entire circuit have to be good. Check the grounds and connectors in the circuit. The condition of the battery is also important. If the battery doesn't have any capacity left the alternator wont get enough current flow through the field to power the alternator. You might need the services of a professional.

Mar 06, 2015 | 1995 Geo Tracker

1 Answer

Wires on starter


that is simple.
day one build.
the big PLUS cable goes from battery PLUS LUG to outboard
Solenoid huge lug.
then the battery NEG lug goes to stop starter bolt and all G16 made.

last is the the dinky wire, that be obvious, the key line

here is a schematic of yours.
the ground is called G105 the fSM even shows photos of it.

http://www.fixkick.com/nostart_files/starting-1w.jpg


NCA = no color assigned. mine are black.

Jun 27, 2014 | 1994 Geo Tracker

2 Answers

Battery keeps dying, no headlights


Check to make sure the power lead from the alternator to the battery has a good connection. Sometimes the connectors get corroded, or the wire separates inside the insulation. You can check the wire for continuity with an Ohm meter...make sure to disconnect the wire at both ends when you use the Ohm meter.
Make sure the battery has a good clean ground. Make sure the alternator is grounded to the engine and the engine ground strap is intact and has clean grounds on both the engine and frame. Test the alternator with the engine running using a voltmeter across the battery. You should read 13.5 to 14.7 volts. If the alternator is not charging the battery will go dead under normal operation. If you don't get the correct charging voltage either your connections are bad or the alternator is bad.

Jan 20, 2014 | 2004 Nissan Maxima

1 Answer

1993 tracker, 4x4 auto ac... will not start (or click) battery fully charged, starter tested good, power at starter and ing wire 12 v when key is turned.


If all you say is true, good starter, new battery, and 12v at solenoid.... then you have to have a bad ground...check the ground wire at the engine block and make sure all cables are tight...

Jun 06, 2011 | 1993 Geo Tracker

1 Answer

I went to start my 95 geo tracker and it did nothing. light and everything came on though. i check battery and it was fine. i replaced the pos and neg battary cables. the ground only goes to started/bell...


yes every thing is grounded also check your starter. make sure all wires are tight and that the starter is good. also check your starter solenoid

Apr 09, 2011 | 1995 Geo Tracker

1 Answer

My 1999 tracker just shuts off at any time.It doesn't matter if it's hot or cold. I took it to a shop, they hooked it up to their computor. It showed nothing was wrong. They said it would have to do it...


many engine grounds are tied to the sane point, check these and also check the coil wire
Either of these could be intermittent and they would only show up on a computer if the systems lost their ground connection or the coil wire shorted to the engine block while it was hooked up

Sep 23, 2017 | 1999 Chevrolet Tracker

1 Answer

How do yu install a geo tracker starter


disconnect ground
remove starter solenoid lead wire and battery cable from starter terminals
remove starter to engine retaining bolts, then the starter
reverse prosedure to install

Feb 09, 2010 | 1995 Geo Tracker

1 Answer

82 Datsun 280z


I doubt the red wire is ground..
Negative is earth and is black.
Positive is red and will go to the electrical box you mentioned.

Jul 01, 2009 | 1983 Nissan 280ZX

1 Answer

1995 Tracker, after clutch cable replacement - won't start


check and replace the negative battery to the engine, the starter is grounding through the clutch cable, very common.

May 07, 2009 | 1995 Geo Tracker

2 Answers

Electrical problems when starting


This sounds like a loose or bad ground cable. This can be checked by attaching negative side of jumper cable to engine and negative terminal of battery. If this solves problem, replace cable.

Aug 01, 2008 | 2000 Nissan Altima

Not finding what you are looking for?
1999 Chevrolet Tracker Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...