Question about 2002 Toyota Camry

Open Question

My 2002 toyota camry, 2.4 l engine. timing chain broke did i bend the valves?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: DRIVE BELT ON 2002 TOYOTA CAMRY

If you are referring to the vehicle having a "Timing Belt", no, it does not have one.
The 2002 Camry 4 cylinder has a Timing CHAIN, and does not need to be replaced.

Posted on Oct 29, 2008

  • 2976 Answers

SOURCE: timing chain setting

Your camshaft and your crankshaft have marks on them. Your timing chain also has marks on it. The timing marks MUST ALL line up at the same time before you move your internal parts. The easiest way to do this is to take out your spark plugs and after tou get the chain, chain tensioner and chain damper on, turn the engine with a wrench watch the marks. The number 1 cylinder should be at tdc.

Posted on Jan 08, 2009

  • 101 Answers

SOURCE: 1993 Toyota Camry V6 Timing Settings

Get a T belt from toyota. It has 3 white lines on it and and arrow mark. 2 lines are solid and one is broken. Put the arrow facing away from the engine. The cam gears have a dot punched into them near a certain tooth. This is where the solid white lines will line up with. The crank gear will have a dot also. It will line up at 90 degrees from the top, towards the front of the car. This is where the broken line will match up with. With the belt installed with all lines on their proper dots and arrow away from the engine, you valve timming is correct.
Of course you need to remove and compress the tensioner also. I assume you know this already since you didn't ask.

Posted on Apr 16, 2009

projdoc
  • 2236 Answers

SOURCE: 2002 toyota camry pasanger side door handle broke

open up door, remove inside door panel, roll up window, and you will be able to get to the handle hardware from the inside.

Posted on Aug 12, 2009

  • 285 Answers

SOURCE: 2002 toyota timing belt replacement

if this vehicle has the 2.4 ltr i has a chain,not a belt

Posted on Sep 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

If the timing belt on a 94 toyota camry broke, would it bend the valves in the head 4cyclinder


The pistons will hit the valves on a lot of cars, but you should ask your Toyota dealer service dept for sure.
Hope this helps.

Mar 19, 2015 | 1994 Toyota Camry

2 Answers

Timing chain broke on Rocam engine will it bend my valves


If the engine has a bore and stroke that are equal to each other is a square engine. An engine with a smaller bore than the engines stroke is undersquare. Engines with a larger bore then stroke are oversquare. If your engine is square the valves will be ok.

Sep 23, 2014 | Cars & Trucks

1 Answer

Can some one show me timeing mark on 1997 nissan maxima please


wow a Nissan Camry.
what engine, ??????????
what are you doing, we dont know. so..
cam marks? chain marks?
spark timing?

in 1997, most cars have 6 or more marks.

Nissan V6? is it (guessing i am)
if doing major cam work , you will need far more that just mark data.

if doing serious work, i recommend the below
  1. a real FSM, from NISSAN if Nissan.
  2. alldata.com
warning:1
all nissan engines are All Interference
so doing cam work or finding engine dead,
do a leak down test by hand before cranking engine
or bend the valves.
after replacing chain, do a cyl. leak down test (a tool)
and if it fails, the valves were bent, do not crank engine
or the damage WILL cascade $$$$$$$$$$$$$$

Feb 22, 2014 | 2006 Toyota Camry

1 Answer

Hours to replace toyota camry time belt


What engine?

the 2.4 has a timing chain and the chain should not need to be serviced under normal driving conditions.

The V-6 has a timing belt. Book time is roughly 3 hours. Add another 1/2 hour if you want to replace the water pump at the same time.

Feb 18, 2012 | 2002 Toyota Camry

1 Answer

TIMING CHAIN BROKE ON MY 2002 2.7 LITER LXI WOULD THE VALVES BEND


The Chrysler 2.7 is an interference engine which means that the piston can go up far enough to hit the valves and bend them. The car would need to be inspected and the timing will have to be calibrated again by a dealer or mechanic after the chain is replaced.

Mar 11, 2011 | 2002 Chrysler Sebring

2 Answers

Timing chain or belt?


The 2002-2006 Camry received the next generation 2.4L 4-cylinder engine (model 2AZ-FE), which combines decent power with excellent fuel economy. This engine does not have a timing belt, it has a chain that does not need to be replaced.
The second choice is very smooth and powerful 3.0-liter 24-valve all-aluminum V6 engine.
Starting from 2004, the 3.3-liter V6 DOHC VVT-i engine is available on SE V6 model.
Both, the 3.0L and 3.3L V6 engines have a timing belt that must be replaced at certain interval

Nov 15, 2009 | 2003 Toyota Camry

1 Answer

94 camry 5sfe 4 cyl.


Most Toyota engines will not bend valves. Tou should be fine.

Mar 27, 2009 | 1994 Toyota Camry

1 Answer

DRIVE BELT ON 2002 TOYOTA CAMRY


If you are referring to the vehicle having a "Timing Belt", no, it does not have one.
The 2002 Camry 4 cylinder has a Timing CHAIN, and does not need to be replaced.

Oct 28, 2008 | 2002 Toyota Camry

1 Answer

Significant engine damage from oil change


Thank you for asking my assistance. I will try my best to help you.

I have been in the Toyota biz for the last 14 years, and, unfortunatly, have not ever heard of this issue. That being said, I do have connections in the engineering dept at Toyota, and on Monday, I will call out to the west coast and inquire further for you.
Now, to the issue at hand: The shield that was bent down is secured very well to the underside of the valve cover. To bend that device, I can only guess that when the oil was being put into the engine via an oil pump, the nozzle of the pump was *** jammed *** down onto the shield, and broke it loose from the internal retainers under the valve cover, and contacted the cam; this is very possible...I agree with the statement that your SM provided, however, further engine damage? Removal of the oil pan would be in order, to determine if any more pieces are there. Doubt it, though.
And, to answer your last question, the responsibility of the cause for failure is your oil change guy.
He bent/broke the shield, and caused your problem. I hope this has helped, if you have any other comments or questions, please feel free to repost.

Oct 03, 2008 | 2002 Toyota Camry

Not finding what you are looking for?
2002 Toyota Camry Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...