Question about 1992 Isuzu Pickup

Open Question

How to replace fuel pump on 92 isuzu pick up - 1992 Isuzu Pickup

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 96 Answers

SOURCE: how to instal a fuel pump of a isuzu trooper 92?

I have a isuzu rodeo, i dropped tail gate removed carpet, i then located fuel pump from under truck, i took a jig saw and cut an opening through deck fuel pump is located on top of tank, it sounds messy but you can save a lot of money and time, after replacing pump silicone piece back in

Posted on Sep 17, 2009

Ad
  • 262 Answers

SOURCE: When its cold my 94 Isuzu pick up leaks fuel i

srew off the plug under the sedormeter that pumps petrol and pump abput 10 sec of diesel out so the water seperates and then put the plug back and start

Posted on Nov 08, 2009

joshnaz
  • 186 Answers

SOURCE: how come my 92 Isuzu p/u won't stay running

even though the fuel pump is working you need to make sure it is running at the right pressure. Hope this helps.

Posted on Feb 28, 2010

hansola
  • 279 Answers

SOURCE: lost power to engine

Check make sure all plugs are firing. Sounds like what my 93 Rodeo was doing-Idled okay but very rough when in gear. Turns out only 5 out of 6 plugs were firing due to a defective ignition module- 100 bucks later it works fine.

Hope this helps.

Posted on Mar 20, 2010

  • 2 Answers

SOURCE: replaced fuel pump in isuzu rodeo 95 and it won't start

hello
did you solve this problem? I am replacing the fuel pump on my 95 Rodeo tomorrow.
Thanks

Posted on Apr 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

92 GMC Sonoma replaced, pump,filter, relay, strainer,and fuesess, what is there left .pump turns on still no fuel


If the pump. Is running check the pump pick up ,hose might be split and suckling air.

Apr 15, 2016 | GMC Cars & Trucks

1 Answer

I have a 92 isuzu trooper it starts but when I put it in reverse or drive it dies out then it is hard to start I have replaced fuel pump, TPS, IAS. Please help


REDUC, HOT,COLD ENGINE OR BOTH?????????????
try a tuneup yet?
spark parts, filters?
3.2L? v6


stalls. 2 reasons and up to 50 causes.
1; i can save the stall easy with fast right foot
easy, harder, Impossible. (evidence class 1 inputs)
2: or engine power lacks (50 reasons)

if the stall is super easy to prevent,
then just the isc VALVE CAN BE STUCK.
isc CONTROL IDLE (VIA COMPUTER, ecu/pcm)

Jan 17, 2016 | Isuzu Cars & Trucks

1 Answer

I don't think my 92 isuzu pick up has power steering..so can I install 1..i see the pumps online just want 2 know if it can b done


You will need the pump, hoses, and steering gear, and the easiest way to get the proper equipment is in a junkyard off of another 88-96 Isuzu Pickup (I think that's the last year of the model in the U.S.) because then you can get the brackets that your truck is probably missing and not need to fabricate anything. It is possible, but it will probably be more work than it seems. Check the link for a description of some of the issues with doing the same swap on 1st gen Isuzu Pickups (81-87 P'ups). 82 pup adding power steering IsuzuPup com

Dec 15, 2015 | Isuzu Cars & Trucks

2 Answers

1993 rodeo not running no power to fuel pump


if there is no power to the fuel pump check relays and fuses....UNDERHOOD FUSE & RELAY PANEL IDENTIFICATION Fig. 2: Underhood Fuse & Relay Panel Identification Courtesy of ISUZU MOTOR CO. Fusible Link Identification ? A - 80 Amp (1991-92 3.1L) ? A - 60 Amp Main-1 ? B - 30 Amp Main-2 ? C - 30 Amp (1993-94) ECM (3.2L) ? D - 30 Amp Condenser Fan (A/T Models) Relay Identification ? 1 - Headlight Relay ? 2 - A/C - Heater Relay ? 3 - Starter Relay ? 4 - A/C Compressor Relay ? 5 - Charge Relay ? 6 - Fuel Pump Relay ? 7 - ECM Relay ? 8 - Wiper Relay Fuse & Circuit Breaker Identification ? 1 - 15 Amp (1991) ECM, Fuel Injection System ? 1 - 15 Amp (1992-94 2.6L) ECM, Fuel Injection System ? 1 - 10 Amp (1992-94 3.1 & 3.2L) Heated Oxygen Sensor, Fuel Injection System ? 2 - 20 Amp (1991-92) Fuel Pump ? 2 - 20 Amp (1993-94 2.6L) Fuel Pump ? 2 - 15 Amp (1993-94 3.2L) Fuel Pump ? 3 - 10 Amp (1991) ? 3 - 15 Amp (1992-94) Turn Signal Lights, Hazard Warning Flasher Lights ? 4 - 10 Amp Horn, Door Locks ? 5 - Not Used (1991 3.1L) ? 5 - 10 Amp Charging System, Charge Warning Light WARNING: Always disconnect battery ground cable before servicing "high- current fuses. It is recommended that "high-current" fuses be replaced by a qualified technician. Page 1 of 2 FUSES & CIRCUIT BREAKERS -1994 Isuzu Rodeo LS? 6 - Not Used (1991) (1992-93 2.6L) ? 6 - 10 Amp (1992-94 3.1L & 3.2L) A/T Interlock System ? 6 - 10 Amp (1994 2.6L) Heated Oxygen Sensor, Fuel Injection System ? 7 - 20 Amp Heater/Air Conditioning Blower Controls ? 8 - 10 Amp Air Conditioner Compressor Controls ? 9 - 10 Amp Right Headlight ? 10 - 10 Amp Left Headlight © 2008 Mitchell Repair Information Co., LLC.
62217_isuzfuse_1.jpg
Underhood fuse block swap out relay #7 thats the ECM relay.
Ground Circuits Using a DVOM, touch negative voltmeter lead to a good ground. Touch positive voltmeter lead to each ground terminal. With vehicle running, voltmeter should indicate less than one volt. If reading is greater than one volt, check for open, corrosion and loose connection on ground lead. See ECM GROUND LOCATION table for ECM ground location.
Page 1 of 1 SYSTEM/COMPONENT TESTS - 2.6L EFI -1994 Isuzu Rodeo

Mar 28, 2010 | 1993 Isuzu Rodeo

1 Answer

Lost power to engine


Check make sure all plugs are firing. Sounds like what my 93 Rodeo was doing-Idled okay but very rough when in gear. Turns out only 5 out of 6 plugs were firing due to a defective ignition module- 100 bucks later it works fine.

Hope this helps.

Mar 20, 2010 | 1992 Isuzu Trooper

1 Answer

How come my 92 Isuzu p/u won't stay running without being primed and the fuel pump is working


even though the fuel pump is working you need to make sure it is running at the right pressure. Hope this helps.

Feb 28, 2010 | 1992 Isuzu Pickup

1 Answer

How to instal a fuel pump of a isuzu trooper 92?


I have a isuzu rodeo, i dropped tail gate removed carpet, i then located fuel pump from under truck, i took a jig saw and cut an opening through deck fuel pump is located on top of tank, it sounds messy but you can save a lot of money and time, after replacing pump silicone piece back in

Sep 16, 2009 | 1992 Isuzu Trooper

2 Answers

92 Isuzu Amigo want stay running


It sounds like your accelerator pump has a leak.

Mar 21, 2009 | 1992 Isuzu Amigo

1 Answer

Looking for the fuel pump


If it`s gas and not diesel, it will be next to the fuel tank or inside the fuel tank

Jan 18, 2009 | 1992 Isuzu Pickup

Not finding what you are looking for?
1992 Isuzu Pickup Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14380 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...