Question about Cars & Trucks

1 Answer

07 Chevy cobalt ss/supercharged. Had issue shifting into second. Felt like it was pushing against me and would grind a little, but would go in. I checked online and found a simple solution. Adjust shifter cable so it seats better into the gate of second gear. I messed up and now I cant find any gears. I unlocked the cable that does the forward and back movement. Any info would be great. And if any more info is needed just ask. Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Loyalty:

    Visited the website for 30 consecutive days.

  • Cars & Trucks Master
  • 372 Answers

You probably went to far with the adjustment. put it back wer it was and do it a tint bit at a time until you gain joy.

If it is so far out you cant, move the tranny position to far foreward, and the shifter, adjust the cable before you connect it, it should get you close

Posted on May 18, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 8 Answers

SOURCE: My 2006 Chevy cobalt key will not turn completely

ur gear shift has a little plastic bar on gear shift and it has crack on the side u cant see have it changed out and both of ur problems will be solved at same time.

Posted on Jul 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2007 Chevy Cobalt SS 2.0 liter supercharged and I have the code that I don't know what they mean P0420 p0098 p0480


po0098 intake temp,sensor,po480 cooling fan ,po420 have you changed catalytic con.???

Sep 27, 2015 | Cars & Trucks

1 Answer

I have a 2006 cobalt SS 2.4L non supercharged . The problem is that the ck engine light is on and the TC light is on and they are making the car shift really hard . I pulled the DTC and got 3 codes/ P0010,...


CODE POO10 - INTAKE CAM AND CMP ACTUATOR CIRCUIT, CODE PO 106 - MANIFOLD ABSOLUTE PRESSURE OR BAROMETRIC PRESSURE CIRCUIT RANGE OR PERFORMANCE PROBLEM.

Jun 16, 2011 | 2006 Chevrolet Cobalt

2 Answers

Chevy cobalt 07 charging fuse/ alternator has been tested good


i have a 05 cobalt SS Superchaged and i bought it new and had to warrenty two batteries and i put another battery n about 7 months ago

Mar 17, 2010 | 2007 Chevrolet Cobalt Coupe

1 Answer

2007 chevy cobalt ss need help


Sounds like you are not getting the full throw of the slave cylinder. If you do not disengage the clutch completely it will shift hard, and sometimes you have to double clutch like you would an old truck. Have whoever put in your clutch bleed the clutch system again.

Hope this helps.

Jan 02, 2010 | 2007 Chevrolet Cobalt Coupe

2 Answers

What engine is in my chevy cobalt


The Cobalt’s LS, LT and LTZ sedan share a 2.2-litre Ecotec inline four-cylinder. The SS uses the 2.4-litre, while the SS Supercharged coupe carries a 2.0-litre Ecotec with supercharger.

Oct 31, 2009 | 2006 Chevrolet Cobalt

1 Answer

HEADLIGHT ADJUSTMENT


6mm or 7/32 alen wrench.the adjustment screw is on the top of the light,easily seen with the hood opened. counter clockwise will raise the light,clockwise will lower it.did my daughters car this morning,took about 1 minute.used a big piece of cardboard obout 5 feet in front of car. to raise drivers side to match pass side.easy fix.

Jun 16, 2009 | 2006 Chevrolet Cobalt

1 Answer

Transmission issues


Check the brake fluid level in the slave cylinder first If low you will not be able to shift..If you have to fill it, pump it for 30 to 40 times to prime with the engine off. Then check the fluid again. If full start and see if it shifts. If it leaks out the slave cylinder or line is leaking

May 24, 2009 | 2006 Chevrolet Cobalt

1 Answer

Cnt find iat sensor on 2005 chevy cobalt ss supercharged


The IAT sensor is most of the time located along the intake tube right after Between the throttle body and MAP sensor. Just follow your air intake tube from your air filter housing to the Throttle body.
Good luck. 

Apr 09, 2009 | 2005 Chevrolet Cobalt

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...