SOURCE: 1996 nissan altima power door lock (driver side
You may need to diconnect the power lock button on the driverside door by prying it out (with the window controls). Problem may be in the switch or a short in the wiring. If this is not it, it may be in the door switch on either the drivers or passengers door.
SOURCE: remove driver's side door panel on 2002 nissan altima
Removal instructions are available with images and step by step directions, www.carstereohelp.com/strnissan.htm
SOURCE: 1993 electric windows stopped working on nissan altima
hard to say without testing, but the master window switches are common and will stop the rest of windows working, make sure window lock switch if off
SOURCE: 2002 Nissan Altima Exterior Door Handle
I seriously doubt that supergluing or even epoxying a handle back will hold at all, or hold for more then few days.
I would only suggest doing the replacement yourself if you familiar with this type of work, or has the aptitude to figure out how to do it, and have the right tools because it is NOT trivial and a number of things can be done wrong, broken or scratched.
The handle itself cannot be replaced. The outside door handle assembly (which includes the handle, the bezel with all associated springs, plastic and metal hardware) has to be replaced. Besides junkyards, which is a long shot for number of reasons, the only place where the handle assembly can be bought is the dealer. And these handle assemblies are not cheap ether. The driver side handle on my 2002 Altima broke first. I paid $60.23+tax, and they had to order it. BEFORE anyone goes to the dealer I suggest to call first, and ask them if they have it in stock. Since door handles are sold painted they will ask you for your car's VIN number so that they match the paint color.
After you pick it up, the replacement will take about an hour (if you know what you doing). The inside door panel has to be removed, it is held in place by the inside door handle and the panel is attached by a number of clips, the handle assembly is attached to the door by three bolts, to remove which you will need a socket with extension. You will also need a good flashlight so you see what you are doing.
If you are familiar how to do this type of work and plan to keep the car for a while I strongly suggest buying a factory service manual on a CD (I bought mine on eBay for under $10). It is worth its price 1000s of times over, and makes almost ALL repair work SOOO much easier.
SOURCE: My 2009 Nissan Altima won't start.
there could be a number of reasons why. Many factors must come together for an engine to successfully start. The energy flow sends a spark from the battery into the electrical components of your engine. The air flow pulls in air, filters particles from it and mixes the clean air with fuel in the carburetor or fuel injection system to trigger the small charge that forces the engine to start. The fuel flow pulls in the gas, filters impurities from it, and sends it to the right component.
Read more: car obd2 diagnostic tool
31 views
Usually answered in minutes!
×