Question about 2001 Toyota Opa 2.0
The heater is not working in my car. The fan and air con work fine. There is just no heat coming from the heater. Which fuse do I check to see if that is the problem?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is a valve on one of the heater hoses that allows heated water to flow through the heater core when you select heat. With heat selected and car warmed up check to see if both of the hoses feel warm. If not then water is not flowing through heater core and valve may need replaced or heater core is stopped up.
Posted on Dec 23, 2008
Usually this will be a 15 amp fuse, and usually blue. This should narrow it down. Pull one out, see if its blown. If you can't tell, put a new one in, and move the old one down to the next blue one. Eventually, you will figure it out. Then I would get an owners manual in english, or buy a dash cover at junkyard, so you will have it for future information. A dealer should be able to print, and give to you a fusebox diagram, then you can glue it to the inside of the fuse box cover. There are also some master fuses under the hood, 30 amp and above.
Posted on Apr 23, 2009
nothing try back flushing heater core, they clog up due to litle water preasure,you might want to flush cooling system if you already havent, hope this hleps.
Posted on Oct 06, 2009
Quick tip that might help. Under the glove box is the blower fan, check the plugs that run to it make sure they have a good connection. then give the blower fan a little tap, mine was just stuck. could have been from dust or something. Or a plug might have been loose.
Posted on Nov 30, 2009
This problem is specific to the Gen4 Celica (86-89). Intermittent or no heat heat is caused by cracked
solder joints in the Heater Control Panel. You need to remove the panel
and re-solder the solder joints. When electrical continuity is broken,
the panel defaults to the cold setting. If you go over a bump and it
touches again, you may get hot. Hence, intermittent or no heat. We have
the complete DIY fix posted at www.st162.net and it's free. Pic below shows the heater control points to re-solder.
Posted on Dec 03, 2009
Tips for a great answer:
Oct 10, 2016 | Nissan Cars & Trucks
Jul 15, 2016 | Toyota Cars & Trucks
Aug 08, 2015 | Cars & Trucks
Jul 07, 2015 | Toyota Cars & Trucks
Sep 21, 2014 | 2002 Land Rover Freelander
Jan 25, 2011 | 1988 Toyota Corolla 4 Door
Nov 03, 2009 | 1991 Peugeot 505
Oct 26, 2009 | 2001 Toyota Avalon
Dec 23, 2008 | 2003 Toyota ECHO
Dec 10, 2008 | 1994 Subaru Legacy Outdoor
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: