My 2001 Toyota sienna is overheating. I replaced radiator cap, checked fluids, no leakage. Any suggestions?
Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!
Posted on Jan 02, 2017
SOURCE: 91 toyota camry overheating problem
So far you did the right things in the right order. If you have a pressure cap (looks like a radiator cap to the rear side of the engine. Dealer $15) change the pressure cap also and then flush the radiator. A sure sign of blockage is when you open the radiator look around inside the top if you see brown or green kind of gunky stuff. Flush the radiator anyway.
If after the radiator is flushed and you still overheat, the next posibility is the head gasket. But don,t worry yet, follow these steps and observations. (this goes for 93 camry V6 also, I have one)
The temperature guage can tell you what you need to know.
Posted on May 22, 2009
SOURCE: toyota seinna po440, po441, po446
you have to understand that there is a leak in the system other than the gas cap for the evaporative system. The system needs to be professionally closed, and smoke introduced into to find the leak, and a through component check, eg.. purge valve vapor canister vent solenoid all functioning correctly
Posted on Sep 01, 2009
SOURCE: Replacing RH Side view mirror on a 2006 Toyota Sienna
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
SOURCE: 2002 toyota sienna change transmission fluid and
The drain plug is on the bottom of the transmission. Its torqued to 49 nM.
1. Remove tranny oil pan drain plug
2. Drain old fluid (roughly 2-4 quarts)
3. Reinstall drain plug.
4. Measure amount drained in a 99 cent orange juice pitcher from Walmart
5. Pour back the same amount drained using Toyota Type T-IV fluid (available in 1 quart bottles from a Toyota dealer.
6. Start engine and shift slowly through all the gears ending in Park.
7. Check fluid level on the dipstick. Add fluid, if necessary, to bring the level to a point inbetween the COLD and HOT marks on the dipstick.
8. Go for a 20 minute drive and recheck fluid level. Add fluid, if necessary, to bring the level up to,
but not beyond, the upper half of the HOT range on the dipstick.
As in 1973, NO FLUSHING is needed and NO FILTER REPLACEMENT is needed, NO PAN REMOVAL is needed. As, as in 1973 todays Toyotas have a metal mesh filter screen that doesn't ever get clogged except in rare cases of transmission operational abuse, including failure to ever change the fluid for 150,000 miles or more.
Posted on Nov 21, 2009
SOURCE: 2001 toyota sienna power mirror/ clock not working...
There is an interior fuse panel located on the left side of the steering column, behind the "change compartment". You just pull it out and you will see a fuse diagram on the back. The fuse you want to replace is the fuse for the cigarette lighter, it is a 15 amp fuse and is located on the bottom right.
As far as I can tell, the owner manual makes no mention of this interior fuse panel and furthermore the actual fuse for the cigarrette lighter doesn't mention that it is connected to the clock and the power mirror.
Posted on Jan 30, 2011
Feb 11, 2017 | Toyota Sienna Cars & Trucks
Feb 07, 2012 | 2001 Toyota Sienna
May 16, 2011 | 1993 Toyota Corolla
Hello and welcome to FixYa!
If you have overheating problem, it can lead to multiple
issues. You may be running on low coolant that's why the vehicle overheats. If
that's the case, please add coolant and make sure that it sits on the right
level, too much coolant can cause overheating too for coolant will overflow.
The vehicle may have a faulty or worn out radiator blower
motor that's why it overheats. If that's the case then you will need a blower
motor replacement to resolve the issue.
If the radiator is clogged with dirt and rusts this issue
occurs too. The coolant doesn't flow normally on the cooling system if it's
clogged. If that's the case, I strongly suggest that you have the radiator
flushed to drain out dirt and rusts. If you think that the radiator served you
enough then it's better to have it replaced.
Please do check the radiator hoses, If you have worn out
hoses it can cause coolant leakage which can result to overheating. A tiny hole
is good enough for the vehicle to overheat.
A faulty thermostat sensor can cause the issue too. If you
have worn out thermostat, the fan may not trigger that's why the fan won't work
when under stressed conditions. A blown radiator blower fuse can cause this
issue too so I suggest that you check the radiator blower fuse and replace it
when necessary.
Hope you find this information helpful enough and thank you for using FixYa! Have a good one!
Apr 23, 2011 | 2006 Toyota Sienna
Hello and welcome to FixYa!
If you have overheating problem, it can lead to multiple
issues. You may be running on low coolant that's why the vehicle overheats. If
that's the case, please add coolant and make sure that it sits on the right
level, too much coolant can cause overheating too for coolant will overflow.
The vehicle may have a faulty or worn out radiator blower
motor that's why it overheats. If that's the case then you will need a blower
motor replacement to resolve the issue.
If the radiator is clogged with dirt and rusts this issue
occurs too. The coolant doesn't flow normally on the cooling system if it's
clogged. If that's the case, I strongly suggest that you have the radiator
flushed to drain out dirt and rusts. If you think that the radiator served you
enough then it's better to have it replaced.
Please do check the radiator hoses, If you have worn out
hoses it can cause coolant leakage which can result to overheating. A tiny hole
is good enough for the vehicle to overheat.
A faulty thermostat sensor can cause the issue too. If you
have worn out thermostat, the fan may not trigger that's why the fan won't work
when under stressed conditions. A blown radiator blower fuse can cause this
issue too so I suggest that you check the radiator blower fuse and replace it
when necessary. What causes the radiator blower fan fuse to blow? It's because
of a failing radiator blower motor, If that's the case have the radiator blower
fan motor replaced.
If the fluid in radiator doesn't circulate then it means
that you have a blown head gasket or a faulty water pump. I suggest that you go
for the water pump replacement first specially if you think that it's near the
end of it's service life. Usually, water pops out the radiator when engine is
reved (a sign of faulty water pump and possible blown head gasket).
Hope you find this information helpful enough and thank you for using FixYa! Have a good one!
Jan 08, 2011 | 1994 Toyota Camry
Jan 03, 2011 | 2001 Toyota Sienna
Jul 08, 2010 | 2004 Toyota Sienna
Jul 19, 2009 | 1995 Toyota Land Cruiser
Mar 29, 2009 | 1993 Toyota Paseo
Jan 03, 2009 | 1991 Toyota Pickup
63 people viewed this question
Usually answered in minutes!
×