Question about 2008 Saturn Aura Hybrid

Open Question

What is axle nut torque for Saturn aura - 2008 Saturn Aura Hybrid

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
bdubsee
  • 75 Answers

SOURCE: how to change a headlight bulb in a saturn aura?

Access to change the headlamp bulbs is through the wheel well. The recommended method is to remove the front tire and then the plastic inner fender liner. Once removed, you'll have easy (more or less) access to the rear of the headlamp housing.

Posted on Oct 04, 2010

Ad
  • 14036 Answers

SOURCE: can you tell me the

AXLE NEW NUT TORQUE IS 145 FT LBS.

Posted on Nov 10, 2010

Ironfist109
  • 3018 Answers

SOURCE: Need to replace rear turn

  • There are either some wing-nuts or some bolts in any case holding the trim on. You may need to pull back some carpeting or matting from the area first to expose this area. They are there. The wing-nut may be the same color as the paneling and they will be plastic so the may be a tad difficult to spot. Use a flashlight to get a real good view of the area.
  • The next step is to pull three more wing-nuts/bolts off of the tail light assemble itself.
  • Now gently wiggle the tail light assemble out.
  • Now twist the bulb assembly out for the bulb you wish to replace.
  • Now reverse to re-assemble.
  • If you have any questions or comments please feel free to ask.

Regards, Tony

Posted on Jun 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are 2007saturn vue driveaxel hub nut torque specifications


105 foot lbs if you are talking about the axle nut

Sep 14, 2014 | 2007 Saturn Vue

1 Answer

Aura speedometer light goes out


PDF]2007 Saturn AURA Owner Manual

www.saturn.com/.../saturn/.../2007/aura/2007-saturn-aur... Saturn Corporation2007 Saturn AURA Owner Manual M. 1 ... trademarks, and the name AURA is a trademark ... Warning Lights, Gages, and Indicators in ..... Get it up to speed.

Apr 14, 2013 | 2007 Saturn Aura XR Sedan

1 Answer

How to instal a rear bearing on a saturn veu 2002?auto repair


This would be a bolt on hub and bearing assembly. You will remove the wheel and the brake rotor or drum. Then unplug the abs sensor if equipped. Remove the axle nut if it's an all wheel drive (it is important to tighten the axle nut to the proper spec after replacing the bearing. Failure to properly torques the bearing will result in premature bearing failure). Remove the four bolts that hold the hub to the knuckle. Rmove the hub/bearing assembly.

Sep 03, 2012 | Saturn Cars & Trucks

1 Answer

Remove front axle 2009 aura


It is held in by an internal snap ring, you must exert a straight out fast snapping motion to release the snap ring, a large wrench works well or a pipe wrench. You must snap it straight out, not at an angle.

Aug 30, 2012 | 2009 Saturn Aura

1 Answer

Front wheel bearing assembly unit, what tools will i need? size sockets ext the right foot lbs of torque for the axel nut,


TOOLS YOU NEED IS 35 METRIC SOCKET FOR AXLE NUT.USE 6 POINT SOCKET.DONT USE 12 POINT SOCKET.COULD DAMAGE AXLE BOLT EDGES.MAKING IT HARD TO GET OFF.YOU NEED A TORQUE WRENCH WITH THE RANGE OF 200 FT LBS TORQUE.YOU NEED 1/2 BREAK BAR.AND A HUB PULLER.NOW TO LOOSEN AXLE NUT.BEST TO LEAVE TIRE ON WITH CAR WEIGHT ON GROUND TO LOOSEN THE AXLE.BECAUSE ITS GOT 192 FT LBS TORQUE.HARD TO LOOSEN WITH TIRE OFF.192 FT LBS TORQUE IS WHAT YOU TORQUE IT AT.BESURE TO READ INSTRUCTIONS TO NEW HUB BEARING ASSEMBLY. YOUR AXLE NUT TORQUE WILL BE DIFFERENT IF YOU GET A NEW GREY NUT.BECAUSE NUT STRENGHT WILL BE DIFFERENT.IF YOU GET A BLACK NUT WHICH IS HARDER STEEL TORQUE WILL BE 192 FT LBS.YOU NEED A 13 METRIC SWIVEL SOCKET TO GET HUB BEARING BOLTS OFF THEY WILL BE IMPOSSIBLE TO REACH WITH OUT IT.HUB BEARING BOLTS TORQUE IS 62 FT LBS

Mar 16, 2010 | 1999 Oldsmobile Alero

2 Answers

Slight knocking sound when I turn my 2007 Saturn Aura.


it is the intermediate steering shaft. there was a bulletin but no recall on this. there is an upgraded part that needs to be installed

Oct 15, 2009 | 2007 Saturn Aura XR Sedan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...