i don't believe the alarm system is aftermarket; i think it's factory-installed, and i read one person's post online who said they didn't think the factory alarm system had a valet switch.
so how am i supposed to prevent the horn from going off when i attach jumper cables?
thanks.
Comments:
Jun 24, 2009
- been there done that. fortunately i solved my own problem: the horn was going off as soon as i connected jumper cables, so i kept the remote for the alarm in my hand and as soon as the circuit was closed, i pushed the "unlock" button on the remote. that did the trick.
Look under dash above brake pedal......it should be mounted there. Or in some rare cases can be taped into wire harness .....not on lower edge of dash.
Faceplate of stereo system lights up, appears to work, but no sound from speakers? I can hear the...
(More)
Faceplate of stereo system lights up, appears to work, but no sound from speakers? I can hear the cd's reading, and the radio locks into stereo for stations, but no sound at all comes from the speakers. Not even the slightest little buzz. I doubt there are any in/outputs or speakers blown (If a speaker were it should be crackling at least) the system has never been pushed or even turned up past I'd say, 30 percent... This is leading me to think it's a loose connection in the stereo somewhere, but I don't know how to get behind it, or if it isn't something else.. Any ideas?
slipping gear problem between first and secondonly when cold engine diagnostic result shows clutch...
(More)
slipping gear problem between first and secondonly when cold engine diagnostic result shows clutch pressure fault with code 46/1 what does that mean ???
How do you fix a tcs problem on a honda 2001?. Its make my car moves like a manual transmission...
(More)
How do you fix a tcs problem on a honda 2001?. Its make my car moves like a manual transmission instead of an automatic transmission movement...