Question about 1994 Jaguar XJ6

1 Answer

What bulbs go on the rear light panel - 1994 Jaguar XJ6

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 159 Answers

It depends on which one or 2 are not working.

Posted on May 18, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change rear break light of mazda autozam? We are having trouble in removing the rear light.Help please.Thanks


Remove some of the casing around the whole rear lighting panel (casing) and also corresponding screws. On top ( just in the middle) of the lighting panel there is a small rectangular space and inside has a kind of circular head connected to it. Using a Screwdriver a sort of a lever, gently insert it and try to pop that circle out by pulling/lever the screwdriver handle to the direction of the car side ( ie: right light panel pulling to the right-side of the car) this will make the whole lighting panel pop out, you can turn the whole panel now and expose where the bulbs are connected to the lighting panel. Unscrew the cover and then you can just pop the broken bulb out like an Edison type of bulb.

Apr 09, 2011 | 1992 Mazda MX-3

1 Answer

How do i change a brake light bulb on 2000 vw jetta?


Removing:
  • Switch off all electrical consumers, switch off ignition key and remove ignition key.
  • Remove rear luggage compartment side panel trim (left or right).
98971821.gif
  • Remove 3 nuts, arrows, and remove housing.
  • Remove bulb holder.
Installing:
  • Install bulb holder.
  • Insert housing into body opening.
  • Tighten nuts.
  • Install applicable rear luggage compartment side panel trim.
Rear Light Bulb Holder Removing And Installing:
Removing:
  • Disconnect electrical connector.
  • Depress retainers, arrows, and remove bulb holder.
98971817.gif Installing:
  • Install in reverse order of removal.
And the Center Mounted Brake Lamp.
High mount Brake Light Removing And Installing:
The high mount brake light is installed in the rear shelf.
98971288.gif Removing:
  • Switch off all electrical consumers, switch off ignition key and remove ignition key.
  • Disconnect electrical connector from high mount brake light.
  • Remove rear shelf
  • Un-clip high-mount brake light from rear shelf, arrows.
  • Install in reverse order of removal.
NOTE: The bulb holder base plate contains soldered- in light emitting diodes (LEDs) that are not replaceable. In the event of LED malfunction, replace complete bulb holder.
Additional

Mar 13, 2010 | 2000 Volkswagen Beetle

1 Answer

Replace a bruned out tail light


Parking, Side Marker & Tail Lights
  1. Remove the lighting assembly from the bodywork.
  2. Disconnect the bulb and socket from the lighting assembly.
  3. Remove the bulb from the holder.
  4. Reassemble in reverse order of the removal procedure.

Rear Turn Signal, Brake & Parking Lights
  1. If necessary for access to the bulb socket, remove the rear trim panel, by depressing the clip at the top or the bottom of the panel. Once the clip is depressed, pull the panel away from the surrounding panel.
  2. To remove the bulb and socket from the cover housing, grab the socket body and press towards the cover housing slightly, then turn counterclockwise until the bulb and socket are free of the cover body.
  3. To remove the bulb, depress the bulb slightly and turn it counterclockwise to release it from the socket.
  4. To install the bulb, carefully push down and turn the bulb clockwise at the same time.
  5. Insert the bulb and socket into the cover housing opening, and turn the socket body clockwise.
  6. Install the trim panel if necessary.

Dec 01, 2009 | 1994 Nissan Pickup

1 Answer

Parking light bulb Toyota TAV


inside the rear compartment there is a triangular shaped panel on the left and right side near the rear door
open the read door and look between the back of the compartment beween there and the rear wheel arch.
open this panel and look inside toward the rear of the vehicle
you will see the back of the tail lights.
depending on model the reverse light is the lower one.
grip and turn the plastic housing about 90° to the left to remove.
remove the bulb by depressing the bulb and turing to the left and release.
warning: do this with a cloth or glove as the bulb may be damaged and break in your hand.
replace with simular rated bulb and reverse the dismantle procedure.

LED bulbs are also available, they are bright and give off little heat and last much longer than conventional bulbs.

NOTE: ensure that the use of LED bulbs are allowed by traffic law in your country.

Nov 14, 2009 | 2006 Toyota RAV4

1 Answer

HOW MANY BULBS ARE IN THE REAR LIGHTS (SUCH AS FOR PARKING, REVERSE, BRAKE). IF WARNING LIGHT ON PANEL IS ONE, WOULD I SEE A BURNT OUT BULB?


You may or may not see a burnt out bulb. The dash light can also mean there's a current issue (ie none of the bulbs are lighting)

2 reverse bulbs
2 license plate bulbs
2 turn signal bulbs
2 rear sidemarker bulbs (side of your tail light assembly)
2 running light bulbs which are the same as your stop light bulbs in the tail light assembly
1 to 6 high mount stop light bulbs (if they're in the window and varies on models)
1 strip of LED brake lights if you have a spoiler



Sep 24, 2009 | 2002 Toyota Camry

1 Answer

NEED TO REPLACE A TAIL LIGHT BULB IN A 2005 CHEVROLET IMPALA


and Repair Notes TAIL LAMP REPLACEMENT REMOVAL PROCEDURE Open the rear compartment. Remove wingnut and pull back the rear compartment trim panel from the tail lamp. Remove the wingnuts from the tail lamp. Remove the tail lamp from the rear body panel. Disconnect the electrical connector from the tail lamp. Remove the tail lamp socket, turning counterclockwise. Remove the bulb from the tail lamp socket. Remove the sidemarker lamp socket, turning counterclockwise. Remove the bulb from the sidemarker lamp socket. INSTALLATION PROCEDURE Install the bulb to the tail lamp socket. Install the bulb to the sidemarker lamp socket. Install the sidemarker lamp socket, turning clockwise. Install the tail lamp socket, turning clockwise. Connect the electrical connector to the tail lamp. Install the tail lamp to the rear body panel. Install the wingnuts to the tail lamp. Pull back the rear compartment trim panel to the tail lamp and install the wingnut. Close the rear compartment.

Jun 08, 2009 | 2005 Chevrolet Impala

2 Answers

Audi A4 need to replace rear brake light on audi a4


Inside the boot is a plastic cap embeded in the boot liner. Remove the cap to reveal a screw. Undo the screw and the whole rear light cluster will come away in a sideways and not rearward direction to reveal all of the bulbs. Hope this helps.

Jun 04, 2009 | 2003 Audi A4 Cabriolet

1 Answer

How do I replace a taillight lens on a 1991 Geo Storm?


Rear Turn Signal, Brake and Parking Lights


STORM COUPE
  1. Disconnect the negative battery cable.
  2. Lift the luggage compartment floor carpet toward the front of the vehicle and remove the spare tire cover panel.
  3. Remove the ten plastic retaining clips from the rear end trim panel.
  4. Disconnect the luggage compartment lamp electrical connector.
  5. Remove the luggage compartment trim panel and the rear end trim panel.
  6. Disconnect the rear combination lamp assembly electrical connector. Fig. 1: Rear Turn Signal, Brake and Parking Lights — Storm
84256028.gif
  1. Remove the seven nuts and the rear combination lamp assembly from the vehicle.
  2. Disconnect the rear combination lamp electrical connector.
  3. Remove the four bulb sockets from the rear combination lamp assembly and remove the four bulbs from the sockets. To install:
  4. Install the four bulbs to the sockets and install the four bulb sockets to the rear combination lamp assembly.
  5. Connect the rear combination lamp electrical connector.
  6. Install the rear combination lamp assembly to the vehicle and the seven nuts.
  7. Connect the rear combination lamp assembly electrical connector.
  8. Install the rear end trim panel and the luggage compartment trim panel.
  9. Connect the luggage compartment lamp electrical connector.
  10. Install the ten plastic retaining clips to the rear end trim panel.
  11. Install the spare tire cover panel and the luggage compartment floor carpet.
  12. Connect the negative battery cable.

Mar 21, 2009 | 1991 Geo Storm

1 Answer

Hyandia Accent


not sure which top tail light you mean? do you wish to replace bulb or actual lamp on the rear screen? this is the high level brake light ! OR do you wish to replace bulb in one of the rear tail lamps offside/nearside ? which ever ? the h/level brake light bulb is accessable for bulb from the rear panel on hatch behind lamp bulb is 16 watt capless push in type

Nov 10, 2008 | 2003 Hyundai Accent

Not finding what you are looking for?
1994 Jaguar XJ6 Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...