Question about 2003 Toyota Camry
Set the alarm light flashes unlock from inside and the alarm does not go off. why would that be?
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
yes factory alarm. there is a smal switch hiden under dasch board find it and turn the alarm of by reseting the boutton you can also open the driver side of car witt your keys
Posted on Dec 22, 2008
actually your car has to have keyless entry, it's part of the alarm system that is given you problems. I had a similar issue with my 87 camery, sounds like they still haven't fixed it in 96.. anyway the fix was for me to take the VIN number over to my local dealer dish out about 35 bucks and get the remote control unit for the alarm system. That also gives you keyless entry :).. So for 35 bucks it was well worth the investment.
In order to disable the alarm there should be a red or black button under the streering colum to left side. You must put the ignition in the run position, and then hold this button for thirty seconds it should disable the alrm until you repeat that procedure.
Posted on Dec 30, 2008
If your remote is attached to the key in the ignition, it could have been bumped setting off the alarm. It is also possible for the lock button to be depressed and lock the doors, if you do not notice this and get out of the car........!
Posted on Jan 15, 2009
Lok in the trunk on the left side, behind the carpet for a small plastic box with a bunch of wires going to it. Look to see if there is brake light powe coming in with the pedal depressed. If so, and no power is coming out, you need to order and replace the "taillamp failure sensor".
Posted on Jul 16, 2009
yes theres is, try locking and unlocking the pass/side door with the key. you can check for power at the starter at the small wire if theres power at that wire when the key is held in the crank position then you have a bad starter try taping on starter while key is held in start if its starts when tapping then starter is bad,heres a diagram to show you were to tap and where to check for power, hope this helps.
Posted on Feb 10, 2010
Tips for a great answer:
Aug 31, 2012 | 2002 Toyota Camry
Apr 17, 2012 | 2004 Toyota Camry
Apr 07, 2012 | 1999 Toyota Camry
Jun 15, 2011 | Toyota Corolla Cars & Trucks
Feb 07, 2011 | 2003 Toyota Camry
Jan 18, 2011 | 2000 Toyota Camry
Jul 19, 2009 | 1995 Toyota Camry
Jun 07, 2009 | 2003 Toyota Camry
Mar 29, 2009 | 1998 Toyota Camry
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: