Question about Cars & Trucks

2 Answers

How do I change the altenator belt on a 1999 acura integra ls

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

It has a idler pulley you just get a 3/8 drive ratchet use the square end to fit in a square on the arm of the pulley pull or push down or up to release the tension on the belt but make sure the belt pattern in on the fan shroud if the car has never been wrecked make notes on how the belt rap around if no picture is not available also can use an extension on the ratchet to help get the belt off.

Posted on May 17, 2014

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.


    An expert who has answered 20 questions.

  • Expert
  • 63 Answers

Loosen the tensioner bolts on the alternator and the main pivot bolt. Twist the body of the alternator until the belt is slack. Remove and replace belt, making sure it follows the same route. Twist the alternator until the belt is tight and do up the bolts you undid. There, now you have bragging rights when one of your mates has the same problem!

Posted on May 17, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the ecu located in my 1999 acura integra ls

It's underneath the floor panel, under the carpet on the passenger side of the interior compartment. You'll have to pull back the carpet to see what I mean.

Mar 03, 2014 | 1999 Acura Integra

1 Answer

What should someone do if they replaced the timing belt on 1999 acura integera LS without first aligning the number one piston Now the the timing is inncorrect , are there bent valves what is the best...

The engine is what is called an "interference engine" which means if the timing belt brakes while the engine is running the valves that are fully open will be hit by the pistons. If your engine was assembled with the cam timing slightly off your valves may be ok. The best advice I can think of is to re-time the engine following the correct sequence for the timing belt replacement and then perform a compression check on the engine. If the compression test fails you probably have some bent valves. removing the head and repairing the damage is the only thing left to do.

Aug 17, 2010 | 1999 Acura Integra

1 Answer

What is the size of the engine in a 1999 Acura Integra LS

The engine in your Acura is a 1.8 Liter inline 4 if no one changed it. Chances are it's the factory engine.

Apr 27, 2010 | 1999 Acura Integra

1 Answer

Can i put a 1994 acura integra ls trans to replace a 1989 acura i

I don't think this would be possible wihtout some hassles.

The engine type build changed twice between the 89 and the 94 series integra.

I would suggest you speak to Honda specialised mechanic before you purchase the 94 tranny.

Also check out the Honda forums as they ahve guys who have done some handy things with the ol integra

Feb 09, 2010 | 1989 Acura Integra

1 Answer

How do i change timing belt on a 1997 Acura Integra LS B18B1

My sincere apologies for the delayed response.
I have only been a free contributor to this site for the last 4-months.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it either way.

Click on the following direct Link. It has several Diagrams you will need for your Timing Belt replacement. Included are the Cover Bolt Locations, Tools Needed and Marks for your specific engine.
You may also want to Print out these Diagrams for future use.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at!

Again my apologies...

Dec 25, 2009 | 1997 Acura Integra Type R

1 Answer

It will not start it ran fine an then the alternator belt broke and now it wolt start

you need to replace the altenator and the belt maybe whe the belt broke like that because a had too much suspension

Oct 13, 2009 | 1993 Acura Integra Hatchback

1 Answer

Hot hood on 1994 Acura Integra LS

it would be normal especially since it is a black hood. as long as your temp gauge reads normal then you should be fine.

Aug 09, 2009 | 1994 Acura Integra

2 Answers



Renew the temp guage sender.

Good Luck !


Feb 06, 2009 | 1989 Acura Integra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides