Question about 2001 Mercury Mountaineer
Did you try the dealer the parts counter usually has that information
Posted on May 17, 2014
Get the dealer to do a screen print of the parts page for the area
Posted on May 17, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: entry code om drivers door
The keyless entry module is located in the rear of the vehicle on the driver's side. You will need to partially remove the left rear panel in the cargo area. You will then see the keyless entry module bolted behind a metal reinforcement bar. There is a sticker on the module that has the 5 digit entry code.
Posted on May 26, 2008
Before you do this you might want to try fresh gear lube. On Ford products they use a synthetic additive in the rear and not in the front 4x4 axle.
The next thing would be to determine if it is a wheel bearing or a pinion bearing. You have to pull the axles and eliminate them as the problem. You might get lucky and not need to do the pinion.
The technical part of shimming the pinion gears with replacing the pinion bearing is about the worst part of the job. You won't know about the gears until you see them. You will need extra shims on hand.
It is a moderate job for two people. If you have all the parts it can be done in a day.
Posted on Aug 23, 2009
Testimonial: "Thank you for your advice"
The inside door handles are plastic so the chances are you need a new one. To get to it you have to take the door panel off and than you will see
Posted on Apr 15, 2010
Tips for a great answer:
Jul 31, 2014 | 2001 Subaru Outback
Mar 10, 2011 | 2002 Mercury Mountaineer
Exploded view of the rear light assembly used on the Explorer/Mountaineer models
The Explorer/Mountaineer models only use two upper lens retaining screws, the bottom use barbed push pins
Pull the lens assembly out from the vehicle body to access the bulb sockets
Grasp the bulb socket then twist and pull it out of the lens assembly
Remove the bulb from the socket by pulling it straight out
Jan 19, 2011 | 1997 Mercury Mountaineer
Fig. : Rear wiper motor assembly and related components
Oct 11, 2010 | 1996 Ford Explorer
Dec 27, 2009 | 2004 Mercury Mountaineer
Jul 28, 2009 | Mercury Mountaineer Cars & Trucks
Jan 17, 2009 | 1997 Mercury Mountaineer
Aug 26, 2008 | 2006 Mercury Mountaineer
May 26, 2008 | 2001 Mercury Mountaineer
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: