Question about 2010 Suzuki Jimny 1.3

Open Question

Suzuki jimny seria imoblizer

My engine blew and the imboblizer came on will not go off

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 102 Answers

SOURCE: valve timing check

Chain drive. Unless the engine's been apart, why would the cam/valve timing change?
Valve clearances are another matter, and unless you want to remove the camshafts, get a mechanic who has the proper Suzuki tool to do them for you. You can measure the clearances, but the shims are between the cam lobe and the valve bucket, and the special tool holds the bucket down whilst changing to a thicker or thinner shim.

Posted on Sep 21, 2009

baugh55grfmj
  • 225 Answers

SOURCE: I have a Suzuki Jimny the engine turns over but

It is in the tank, on top of the tank. It must be dropped to access the fuel pump. If You turn the key forward till your auxiliaries come on, you should here the fuel pump if you listen with your ear to the gas pump spout. It will make a dull whiny noise if it is working.

Posted on Jan 12, 2010

emissionwiz
  • 75066 Answers

SOURCE: fuel pressure suzuki jimny

It should be about 45 PSI at idle.

Posted on Oct 02, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Who makes the m13a engine


The Suzuki Motor Corporation makes all the M series engines for the Suzuki range.

Dec 28, 2015 | 2010 Suzuki Jimny 1.3

1 Answer

Where is the baromic sensor fitted


the MAP, sensor, right? where is it?
why do you ask, curious? , someone stole it?
or got DTC errors that say, MAP dead. ?
why not just post the symtoms or buy the FSM and read it like above post. but above post is for USA cars, and there are no Jimny here, at all. and none on the above site for the same reasons
this is a USA forum not UK or European, it only covers USA cars.
why 2, why not tell country , engine controls run and work different on all countries (due to smog laws, etc)

the ignitor in most suzuki's moved to 2 places back in 1990s (late)
to the COP coil (DOHC engine) or to the ECU. itself.
my 96 still has a fire wall 4 port Ignitor J18 engine. but was moved in 97.

where is your jimny, (no address,) just a country,.
suzuki has like 56 engines and 95 markets. so.....
in your case we are 1 engine, and 95 markets.

why3, why ask for easter egg hunts? nobody here can answer.
post your VIN, then we can, (put xxxx at end for privacy)

Apr 17, 2015 | 2007 Suzuki Jimny 1.3

1 Answer

My Suzuki jimny stoped whiledriving


many suzuki have 2 baros, mine has 3.

one for altitude, inside ecu,

one for map TBI engine, (map sensor main 108 fails )

one for EGR map, to test EGR only. (my G16b has it)

we dont have 1.3 Jimny's here so can look it up for you.

but the FSM for your car (book) has this.

the P0108

is the main engine map sensor. (using usa fed rules for OBD2)

yours is EOBD rules. (im clueless with those)

that is used to calculate all air flow through the engine

it's output is stuck high,,

it's unplugged is my guess.

our map does 3.9V with the vacuum hose pulled. or just key on.



over 3.9v is illegal voltage and is bad map or unplugged.

when it goes to near 0v.volts at full vacuum 29"



this page may match your map for all voltages and states.



http://www.fixkick.com/sensors/my-map.html



that is my best idea here , lacking non USA books,

Apr 15, 2015 | 2007 Suzuki Jimny 1.3

1 Answer

Is therea nylon bush on the end of the gear shift on a02 suzuki jimny


sure,
the 5speed?
its in the Suzuki parts pages. ever see those online?
suzuki.com (dealer parts pages?)

the plastics are there to stop (like relic cars had) shift lever buzz.

the older 5speed at G16 engines had this.
http://www.fixkick.com/buy-parts.html#5sp-shift

i cant look yours up , this is USA forum and we dont have Jimnys here.
do so in your country and its there, i promise.

Mar 12, 2015 | Suzuki Jimny Cars & Trucks

1 Answer

Suzuki K6a engine. Turns over but won't start


we dont have this engine in USA< (this forum is USA forum.....)
what year, what car? ?? what country?
the k6a fits many cars, and many years and can be carb or EFI fueled.

the K6a line up, do tell what you are driving....please.
now to answer in GENERIC Mr. Otto Cycle mode. (gas engines)
no spark, check spark.
never tuned up, ever.
low compression, find timing chain slipped or worse.
twin cam 3 cylinder.
with chain drive. if chain is/was quiet, the cam timing should be good. as is compression over 150psi.
if compression is good, and spark good, x3
then it will run on test fuel, does it?
of not clogged melted CAT?

Mar 10, 2015 | Suzuki Cars & Trucks

1 Answer

Head bolt torque of susuki jimny 2001


we (USA forum) do not have Jimny cars. here.
so what engine, we can never guess your engine
we can look under your hood, so...
you need 2 things
staged torques
and order.
per wiki there are these engines used on GEN3

658 cc K6A I3 (JB23)
1,298 cc G13BB I4 (JB33)
1,328 cc M13A I4 (JB43)
1,461 cc K9K TD I4 (JB53)

we have not a clue.

google your engine real name with head torque and win.

Mar 01, 2015 | 2006 Suzuki Jimny 1.3

1 Answer

How to remove alternator on 2010 suzuki jimny


which enigne? we can never guess that. (rare)
1: pull neg lug of battery terms.
2: get the belt slack. (RTM, read the FSM ) read fac. sev. man.
3; loosen all alt pivot bolts. and tilt alt. of belt is not off yet.
4: remove all bolts. on alt and wires. (plug, unplugged)
the alt just fell out.
above is generic. as no engine stated.

Jun 22, 2014 | 2010 Suzuki Jimny 1.3

2 Answers

2008 suzuki jimny wont start Was running ok then


sure , they all ran like new, when new. or yesterday.
but not now. that means it BUSTED.

so check for spark.
if not spark then fix that.
modern cars have EFI, and all EFI cut fuel if the cars ECU brain
even thinks for a moment there is no spark (it can see it?
so spark is 1st. (if engine is good,)
ever give the car a full 60k mile tuneup, (100km)
if not why not?

Sep 29, 2013 | Suzuki Cars & Trucks

1 Answer

1998 Suzuki Jimny engine stalls when A/C is used - Wait 4-5min and starts again - No Service Warning signs


don't switched on the A/C suddenly after starting the engine take severe time for the warm up of the engine or u may go for full A/C servicing which include cooling coil,radiator cleaning

Jun 17, 2012 | Suzuki Jimny Cars & Trucks

Not finding what you are looking for?
2010 Suzuki Jimny 1.3 Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...