Question about 2002 Ford Explorer
I've checked all the fuses & wiring. i don't know what else it could be.
Have you checked the multi plug on the back of radio could be a broken wire or connection good luck.
Posted on Jun 04, 2014
Because the lights come on does not mean the radio is on , as the radio light is tied in with all the other lights and the dimmer switch. It also maintains the memory system In other words , 2 power lines. Double check all connections including the antenna and speakers. If all is good then radio is probably faulty.
Posted on May 27, 2014
DEAR , THE PROBLEM IS WITH YOUR RADIO ,TAKE IT OUT AND GIVE IT FOR REPAIR BECAUSE OUTPUT AMPLIFIER OF RADIO HAS GONE US
Posted on May 25, 2014
Does your radio have a mute button you might have accidentally pressed? Check your "fade" and make sure it's in the middle.
Posted on May 18, 2014
It could be a bad connection in the back of the radio. Possibly a bad wire harness. Check the speaker wires in the back of the radio. It could be bad splicing or not hooked up right.
Posted on May 17, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The ABS light is for the Anti-lock Braking System. The MIL will illuminate if there is a difference in wheel speed sensors signals to the PCM. So you might have a wheel speed sensor that is going out on you. Does the light come on at low speeds, or just higway speeds? You could take the vehicle to a local parts store and have them pull the codes for you and that will tell you which speed sensor is out of whack. Also road grime, dirt and gunk buildup can cause speed sensors to give false readings. Hope tihs helps you out.......
Posted on Oct 22, 2009
SOURCE: 2007 FORD EXPLORER XLT
need to set tires at correct pressure you can find a sticker on the inside of drivers door to tell you the correct pressure after you do that it sould reset the light after you drive
Posted on Feb 02, 2010
You may have a factory amplifier in the rear of the explorer in the right cargo panel. You need to supply power to it by connecting the amp power on (Blue/White I think) in the dash to a power source (such as red on your stereo harness) so it comes on with the key. If you do have the amplifier, that's why you have no sound.
Posted on Apr 25, 2010
Tips for a great answer:
May 20, 2012 | 2002 Ford Explorer
Apr 03, 2011 | 2002 Ford Explorer
Mar 31, 2010 | 1996 Ford Explorer
Mar 01, 2010 | 1998 Chevrolet Cavalier
Feb 27, 2010 | 2002 Ford Explorer
Oct 31, 2009 | 1996 Ford Explorer
Aug 10, 2009 | 1991 Ford Tempo 4 Door
Mar 29, 2009 | 1994 Ford Explorer Limited
Mar 14, 2009 | 1994 Ford Explorer Limited
Sep 29, 2008 | 1996 Ford Explorer
89 people viewed this question
Usually answered in minutes!