Question about 2000 Honda Prelude
The dipstick should be located to the right of the valve cover and colored yellow. Yours could be missing if you are not immediately spotting it. Try looking for a metal tube no bigger around than a dime that will be heading down to the bottom of the engine.
Posted on Jun 04, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
theres a lil slot on the lower left face plate of the dash.. Insert Ignition key or suitable tool (very small screwdriver) and hold for a few seconds.. this will reset the mileage counter and turn off the oil lamp.. Thankx
Posted on Mar 12, 2009
You need to adjust the latch itself. Loosen the 3 bolts and move the latch up a quarter inch. Other than that take it to a decent body shop and they will diagnose it for free.
Posted on Aug 15, 2009
Sounds like fuel in oil obviously. Don't run it until you cure problem !! You may have a an injector leaking down or something. If your fuel is mixing with oil, it's just a matter of time before it seizes if you keep running it. Has it had starting problems lately?
Posted on Aug 30, 2009
Could be a bad oil sending unit switch, but have it check out right away, if not a bad switch will cause major engine damage with low or none oil pressure.
Posted on Jan 16, 2010
Tips for a great answer:
Sep 22, 2015 | Cars & Trucks
Feb 14, 2014 | 1992 Honda Prelude
Feb 25, 2011 | 1988 Honda Prelude
Jan 05, 2011 | 1990 Honda Prelude
Mar 12, 2010 | 1996 Honda Prelude
Nov 05, 2009 | 2000 Honda Accord
Aug 03, 2009 | 2001 Honda Prelude
May 06, 2009 | 2000 Honda Prelude
Mar 10, 2012 | 2000 Honda Prelude
49 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: