Question about 2001 Ford Ranger Regular Cab
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1993 Ford Ranger linkage
Sounds like the shifter cable,if it is and automatic trans. has broken. look at the trans selector under the truck and see if it moves when you select different gears.If it doesn't its the cable
Posted on Jan 29, 2009
Try loosening the nut for the cable. Shift into park from under hood. Put shifter in park and pull cable, push nut towards cable and tighten nut.
Posted on Aug 20, 2009
The only adjustment you'll probably need is to get the air out of the clutch line. Loosen the bleeder screw, and put a two or three foot vacuum line on it. Submerse the other end of the line in a bottle of brake fluid. Pump the clutch untill no more bubbles are coming out of the hose into the bottle. Be sure to keep the reservoir topped up while you do this. Hold the clutch down, and tighten the bleeder screw. Some hydraulic clutches do have an adjustment on the rod that goes from the slave cyllinder to the pressure plate. I'm not sure about yours. If there is a nut on the rod, you can adjust it somewhat. You want it set so that there is just a little bit of play between the rod and the pressure plate where the rod goes. If none of this helps, you mayneed to replace the slave cyllinder.
Posted on Sep 27, 2009
many of these trucks have a mazda trans in them, to remove these shifters you will need to remove the 4 phillips head screws from the corners of the trim around the shifter boot and pull it up out of your way. it's not necessary to remove the boot from the shifter, just lift it up for access to the top of the trans. at the base of the shifter on the top of the trans you will see a plate attached with torx head screws. remove all but 2 of them, now make sure the trans is in neutral and remove the last 2 screws and pull the shifter straight up. the shifter is now out leaving a big hole open on the top of the trans for dirt to fal into so put a wrag in it or screw a piece of cardboard to it. installation is the reverse. good luck
Posted on Oct 08, 2009
Tips for a great answer:
Apr 14, 2015 | Ford Cars & Trucks
Mar 03, 2015 | Ford Cars & Trucks
Dec 04, 2013 | 2000 Ford Ranger SuperCab
Jan 25, 2011 | 1988 Ford Ranger
Feb 05, 2010 | 1989 Ford F 150
Apr 30, 2009 | 1996 Ford Ranger SuperCab
Apr 27, 2009 | 2001 Ford Taurus
Dec 22, 2015 | 2001 Ford Ranger Regular Cab
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: