Question about Cars & Trucks
Posted on May 17, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: mazda mpv problem
I agree. I have had this problem twice and it has been a coil. This model has individual coil packs for each cylinder, so unless you have the tools to find out which cylinder is not getting full spark, have a mechanic do it.
Side note...I recommend inducting about 5 oz. of Sea-Foam through a vacuum line every 20,00 miles or so. The rest of the can goes into the fuel tank to clean the injectors. It has helped smooth out a rough idle.
And a can of Restore with each oil change after 100,000 miles will take care of hydraulic lifter chatter.
Posted on May 24, 2008
The reason is the water pump is driven off the timing belt, extra parts and allot more labor. No the eng does not have to be removed, labor time around 4 hours, parts about, about $125 US for parts, if it is a dealer add $75 US
Posted on Jan 08, 2009
Courtesy of: forums.mazdaworld.org
Try this, it works on several 2002 models:
Step 1: Open drivers door and leave open.
Step 2: Lock and unlock the drivers door using the power door lock switch on the door.
Step 3: Insert key into the ignition.
Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.
Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).
Step 6: ECU should respond by locking and unlocking the doors.
Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.
Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.
Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done
Posted on Feb 21, 2009
Remove door panel to check wiring to switch and motor
See if motor is getting power through the switch - if so motor is bad
If no power to motor check operation of switch - jump wires to test
if window works bad switch
Posted on Jul 08, 2009
Tips for a great answer:
Feb 16, 2017 | 2002 Mazda MPV
Sep 07, 2011 | 2002 Mazda MPV
Aug 28, 2011 | 2002 Mazda MPV
May 27, 2010 | 2002 Mazda MPV
May 23, 2010 | 2000 Mazda MPV
Jun 16, 2008 | 2002 Mazda MPV
15 people viewed this question
Usually answered in minutes!