Question about Ford Bronco

1 Answer

Exploded view1989 ford bronco power steering pump

Need to find seals ware preasure line attaches

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,210 Answers

Are they not just O rings under a tube nut with a swaged end to the rigid pipe. The flexi's are self seal hydraulic unions?

Posted on Jun 05, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76691 Answers

SOURCE: power steering gear box

The seals can be changed, they sell a kit, but u will have to remove the box to do that.

Posted on Nov 24, 2008

warlock61
  • 659 Answers

SOURCE: air in power steering lines

trans fluid and p/s fluid same thing thats fine. Did you fill fluid first before starting vehicle? These pumps burn up easily if run dry.

Posted on Dec 16, 2008

MNfisherman
  • 11896 Answers

SOURCE: power steering repair

www.autone.com
select repair info
choose your car
see anything you want

Posted on Jan 16, 2009

  • 465 Answers

SOURCE: power steering pump location

some car dont have it when u turn is it hard to move itthen u have no power steering .go to one of your local auto parts store they will help you out

Posted on Mar 17, 2009

  • 1075 Answers

SOURCE: power steering pump Ford Focus 2006 DIY Manual

its quite quite simple;take your pipes of and block them off reconnect them to new pump and replace pump to in line belts.adrian;;;

Posted on Nov 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the power steering fluid leak out of the reservoir top under pressure when the engine is running


You have a clog in the system. The pump must be working to build the pressure .I would look for a stuck check valve ware the lines go into the pump or the steering box at the other end of the lines .It important to fix this now when its still coming the filler .Ford has enough problems with this system you don't want to blow the seals it will leak everywhere

Sep 18, 2016 | Cars & Trucks

1 Answer

How involved is it to replace a power steering pump on a 2007 Explorer 4.0?


Power Steering Pump - 4.0L Special Tool(s) Installer Set, Teflon® Seal
211-D027 (D90P-3517-A) or equivalent Material Item Specification MERCON® V Automatic Transmission Fluid
XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) MERCON® V
Item Part Number Description 1 388898 Teflon® seal 2 - Pressure line-to-pump fitting (part of 3A719) 3 W700839 Power steering pump bolts (3 required) 4 3A674 Power steering pump 5 W503924 Pressure line bracket-to-engine bolt 6 3691 Power steering pump supply hose 7 W503924 Power steering pump supply hose bracket bolt
Removal
NOTICE: While repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the power steering components may result.

  1. Using a suitable suction device, remove the power steering fluid from the reservoir.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
  1. Remove the power steering pump pulley. For additional information, refer to Power Steering Pump Pulley - 4.0Lin this section.
  1. Remove the pressure line bracket-to-engine bolt.
  1. Remove the power steering pump supply hose bracket bolt.
  1. Release the power steering pump supply hose clamp and disconnect the hose.
  1. Disconnect the pressure line-to-pump fitting.
    • Remove and discard the Teflon® seal.
  1. Remove the 3 bolts and the power steering pump.
Installation
  1. NOTE:A new Teflon® seal must be installed.Using the Teflon® Seal Installer Set, install a new Teflon® seal to the pressure line fitting.
  1. Position the power steering pump and install the 3 bolts.
    • Tighten to 25 Nm (18 lb-ft).
  1. Connect the pressure line-to-pump fitting.
    • Tighten to 75 Nm (55 lb-ft).
  1. Connect the power steering pump supply hose.
  1. Install the power steering pump supply hose bracket bolt.
    • Tighten to 11 Nm (97 lb-in).
  1. Install the pressure line bracket-to-engine bolt.
    • Tighten to 11 Nm (97 lb-in).
  1. Install the power steering pump pulley. For additional information, refer to Power Steering Pump Pulley - 4.0Lin this section.
  1. Fill the power steering system. For additional information, refer to Section 211-00.

Apr 13, 2016 | Ford Cars & Trucks

1 Answer

Exploded view of power steering pump 1989 full size bronco viewfo


I don't have a diagram for you,but the plastic tank holds on the pump by the lines,behind the tank is a large O-ring,try tightening the lines a little but gentle.Typical Ford power steering issue besides the steering box leaking

May 17, 2014 | Ford Cars & Trucks

1 Answer

I repaced my powersteering serpentine belt and power steering pump 3 months ago. today it was 32 below 0 C', I started my truck and all of the sudden no power steering I parked it the night before and...


You have a leak fords are noritas for this although its a great disgin madza disgined this pump it works like a rotery engine and last for ever its likely the plastic resiveor had swolen and the seal is likely leaking. You could try putting fuild in with seal swell and also looking for a leak in one of the lines. Look for the oil if its not on the pulley or beat its the lines.6 Mounts ago i rebuilt my 85 that i've had for 23 years there was no WARE AT ALL in that pump but it has always leaked and it still dose a little not on the belt or pulley its just the way they are

Jan 20, 2011 | 2000 Ford F150 Flareside SuperCab

1 Answer

How do you remove power steering pump on 1990 ford tempo gl


  1. remove the powersteering belt.
  2. Use a puller to remove the pulley.
  3. remove the powersteering lines, theres a preasure line and a return hose
  4. remove the three bolts holding the pump to the bracket,
  5. reverse directions to install new pump. hope this helps.

Oct 24, 2010 | 1990 Ford Tempo

1 Answer

Need exploded view of power steering gearbox for 1975 ford f-150


REMOVAL & INSTALLATION Fig. 1: Power steering gear installation1980 and Later 85768076.gif
Fig. 2: Intermediate shaft-to-steering column upper joint connection. Remove the pinchbolt shown to disconnect. 1978 Bronco w/power steering shown 85768077.jpg
Fig. 3: Intermediate shaft-to-steering gear joint connection. Remove the pinchbolt shown to disconnect. 1978 Bronco w/power steering shown 85768078.jpg
  1. Raise and support the front end on jackstands.
  2. Place the wheels in the straight-ahead position.
  3. Place a drain pan under the gear and disconnect the pressure and return lines. Cap the openings.
  4. Remove the splash shield from the flex coupling.
  5. Disconnect the flex coupling at the gear.
  6. Matchmark and remove the pitman arm from the sector shaft.
  7. Support the steering gear and remove the mounting bolts.
  8. Remove the steering gear. It may be necessary to work it free of the flex coupling. To install:
  9. Place the splash shield on the steering gear lugs.
  10. Slide the flex coupling into place on the steering shaft. Make sure the steering wheel spokes are still horizontal.
  11. Center the steering gear input shaft with the indexing flat facing downward.
  12. Slide the steering gear input shaft into the flex coupling and into place on the frame side rail. Install the flex coupling bolt and torque it to 30 ft. lbs.
  13. Install the gear mounting bolts and torque them to the specifications shown in the Torque Chart at the end of this Section.
  14. Make sure that the wheels are still straight ahead and install the pitman arm. Torque the nut to the specifications shown in the Torque Chart at the end of this Section.
  15. Connect the pressure, then, the return lines. Torque the pressure line to 25 ft. lbs.
  16. Snap the flex coupling shield into place.
  17. Fill the steering reservoir.
  18. Run the engine and turn the steering wheel lock-to-lock several times to expel air. Check for leaks.
prev.gif next.gif

Aug 21, 2010 | Ford F-150 Cars & Trucks

1 Answer

1987 FORD FULL SIZE BRONCO FUEL PROBLEM, SHUTS DOWN


The only way air can get in the fuel line is if you have a hole in it! Problem of course is were? I would run the fuel line from back to front and back again. Look for any wet spot that you can find. You may even have to drop the tank to ba able to look on top. I would suspect the problem is in the line before the high preasure pump, being as you are pulling air into the system. I have seen leaky lines allow air in, but not let fuel out.

Sep 12, 2009 | 1987 Ford Bronco

1 Answer

Loose steering


Bob, yes you can adjust the steering box with out problem.

Jun 01, 2009 | 1993 Ford Bronco

3 Answers

Power steering leak on a 1988 full size bronco


The gear box is a common problem on this model. That would be the place I would start. A cheap, temporary fix is to go to your local parts store and ask for Lucas Power Steering Stop-Leak. It will buy you some time.

Apr 09, 2009 | 1988 Ford Bronco

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...