Question about 2012 Lexus IS 250

1 Answer

How to reset oil maintenance switch - 2012 Lexus IS 250

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

I believe it might be in manual also. Here is instructions.
Switch the display to the trip meter "A"
Turn the "POWER"switch off.
(If you have push button start)
While pressing the trip meter reset button turn the "POWER" switch to ON mode (press power button 2 times, foot off the brake).
Continue to press and hold the button until the trip meter displays "000000"and the multi-information display indicates that the reset is complete. or you here a beep.

Posted on May 17, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my manint req's light after an oil change on a 2003 Honda pilot


Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.

Mar 09, 2015 | 2003 Honda Pilot

1 Answer

Can't reset oil gauge on 2006 Lexus 430


Instructions
    • 1 Turn the ignition switch to "ON" without starting the engine.
    • 2 Press the trip odometer button to change the display to the total mileage.
    • 3 Turn the ignition switch to "OFF."
    • 4 Press and hold the trip odometer button. Turn the ignition switch to "ON."
    • 5 Release the trip odometer button when the oil change maintenance light resets.

Oct 17, 2012 | Lexus GS 430 Cars & Trucks

1 Answer

Maintenance reqd indication light is still showing on the dashboard after have changed the oil filter and oil. What is the problem? My car is 2008 Toyota Avalon.


Set the display window to ODO.
Turn the ignition switch off.
While pressing the reset switch, turn the ignition switch on(IG). Keep pressing the reset switch for at least 5 seconds to complete reset procedure.

*IF this does not work you have be confused with the warning light, it may not be the oil life, but check engine light, refer to owners manual for clarity.

May 17, 2011 | 2008 Toyota Avalon

1 Answer

How do i reset oil change indicator


  1. Turn the ignition switch to the ON (II) position.
  2. Press the Select/Reset knob repeatedly until the engine oil life indicator is displayed.
  3. Press the Select/Reset knob for more than 10 seconds. The engine oil life indicator and the maintenance item code(s) will blink.
  4. Press the Select/Reset knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to 1OO.

Dec 27, 2010 | 2006 Honda Accord

1 Answer

How do you set back the % to 100 after a oil change


1. Turn the ignition switch to the ON (II) position.
2. Press the select/reset knob a couple of times until the engine oil life
indicator is showing.
3. Press the select/reset knob for about 10 secs. The engine oil
life and the maintenance item code will blink.
4. Press the select/reset knob for another 5 secs.
The maintenance item code will go away and the engine oil life reading
will reset to 100.

Thank you for using Fixya, and good luck

Apr 13, 2010 | 2009 Honda Accord

1 Answer

How do I RESET MY OIL GAUGE TO GO BACK TO 100%? I HAVE TURNED THE CAR TO THE ON POSITION, I THEN GET IT TO WHERE IT SAY 30%, I THEN PRESS THE BUTTON TIL IT FLASHES "cancel" i then let go, then press again...


  1. Turn the ignition switch to the ON (II) position.
  2. Press the Select/Reset knob repeatedly until the engine oil life is displayed.
  3. Press the Select/Reset knob for about 10 seconds. The information display shows the reset mode initial display as shown.
    1. Select the "OIL LIFE" indicator by turning the Select/Reset knob. The display begins to blink. Push the same knob to enter this setting.
    2. The engine oil life and the maintenance item code(s) will begin to blink. Push the Select/Reset knob to reset.
    3. The maintenance item code(s) will disappear, and the engine oil life will reset to "100".

Nov 14, 2009 | 2007 Honda CR-V

3 Answers

I have a 2008 corolla. It has an auto light when the car needs an oil change. I need to know how to reset it.


Look in your owners manual and go to the part that explains the different symbols on your dash. Look for that service reminder and it should tell you what page to go to to learn more about that. Somewhere there should be some wording to the effect that "When you have your car serviced by a certified Toyota dealer they will reset it for you. In the event that someone other does your maintenance then this is the procedure to reset......."

Oct 04, 2009 | 1998 Toyota Corolla

2 Answers

Yellow/gold wrench is illuminated on dash board


Please note:

Honda makes reference to proper vehicle maintenance in their service/user manual. Consult your authorized Honda dealer before doing anything that may void your vehicle warranty.

https://techinfo.honda.com/rjanisis/pubs/om/AC0606/AC0606O00192A.pdf

Owner's Manual page 193-197.

Resetting the Engine Oil Life
Indicator

Your dealer will reset the display
after completing the required
maintenance service. You will see
‘‘OIL LIFE 100 %’’ on the odometer/
trip meter display the next time you
turn the ignition switch to the ON
(II) position.

If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
follows:

1. Turn the ignition switch to the ON
(II) position.

2. Press the Select/Reset knob until
the engine oil life indicator is
displayed.

3. Press the Select/Reset knob for
more than 10 seconds. The engine
oil life indicator and the
maintenance item code(s) will
blink.

4. Press the Select/Reset knob for
more than 5 seconds. The
maintenance items code(s) will
disappear, and the engine oil life
will reset to ‘‘100.’’

Important Maintenance
Precautions

If you have the required service
done but do not reset the display, or
reset the display without doing the
service, the system will not show the
proper maintenance intervals. This
can lead to seriousmechanical
problems because you will no longer
have an accurate record of when
maintenance is needed.
Your authorized Honda dealer
knows your vehicle best and can
provide competent, efficient service.
However, service at a dealer is not
mandatory to keep your warranties
in effect. Maintenance may be done
by any qualified service facility or
person who is skilled in this type of
automotive service. Make sure to
have the service facility or person
reset the display as previously
described. Keep all receipts as proof
of completion, and have the person
who does the work fill out the
maintenance record. Check your
warranty booklet for more
information.

Information obtained from:

https://techinfo.honda.com/rjanisis/RJAAI001_OMANUAL.ASP?YEAR=2006

If the information provided to you was useful, please rate my response.

Thanks,

OpenSource13

Apr 19, 2009 | 2006 Honda Accord

1 Answer

I changed my oil on my LX and the change oil warning is not reset


RESETTING THE ENGINE OIL LIFE INDICATOR
On LX and EX models

If maintenance is done by someone other than your dealer, reset the maintenance minder as follows:

1. Turn the ignition switch to ON ( II ).

2. Press the SELECT/RESET knob until the engine oil life indicator
is displayed.

3. Press the SELECT/RESET knob for about 10 seconds. The engine oil life indicator and the maintenance item code (s) will blink.

4. Press the SELECT/RESET knob for more than 5 seconds. The maintenance items code (s) will disappear, and the engine oil life indicator will reset to "100".

Jan 01, 2009 | 2004 Honda Odyssey

Not finding what you are looking for?
2012 Lexus IS 250 Logo

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

881 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...