Question about Chevrolet Monte Carlo
It means something that the traction/abs system uses to sense wheel slip has malfunctioned. Possibly a speed sensor or the traction pump. You need to get it scanned to see what code is in system.
Posted on Jun 24, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Apr 17, 2018 | Cars & Trucks
The ability of the control modules to communicate through the serial data circuit
The identification of any stored diagnostic trouble codes (DTCs) and their status
The use of the Diagnostic System Check will identify the correct procedure for diagnosing the system and where the procedure is located.
The traction control switch is a input to the body control module, with a scan tool hooked up an looking at BCM data ,check for conformation the traction control switch is turning on an off !
SERVICE TRACTION SYSTEM The IPC illuminates the SERVICE TRACTION SYSTEM indicator in the message center when the electronic brake control module (EBCM) detects a malfunction in the traction control system. The IPC receives a class 2 message from the EBCM requesting illumination. The SERVICE TRACTION SYSTEM indicator illuminates for 60 seconds when the condition is present. The IPC sends a class 2 message to the radio in order to activate an audible warning.
TRAC OFF The IPC illuminates the TRAC OFF indicator when the following occurs:
The electronic brake control module (EBCM) inhibits the traction control system due to a malfunction in the traction control system. The IPC receives a class 2 message from the EBCM requesting illumination.
The body control module (BCM) detects that the traction control switch has been pressed (signal circuit is low). The BCM sends a class 2 message to the EBCM in order to disable traction control. The IPC receives a class 2 message from the EBCM requesting illumination. The BCM sends a class 2 message to the radio in order to activate an audible warning.
Feb 25, 2015 | 2003 Chevrolet Impala
Jun 02, 2011 | 2002 Oldsmobile Silhouette
Jan 08, 2011 | 2007 Pontiac G5 Gt Coupe
Nov 22, 2010 | 2008 Chevrolet Hhr
Mar 08, 2010 | 2007 Pontiac G5 Gt Coupe
Jul 21, 2009 | 2004 Pontiac Grand Prix
Jun 11, 2009 | 2003 Chevrolet Impala
1,074 people viewed this question
Usually answered in minutes!