Question about 1998 Pontiac Trans

Open Question

Where is the ignition module on a 1998 pontiac transport?

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 625 Answers

SOURCE: how to replace rear wiper blade in pontiac transport montana 1998

When you purchase a wiper blade, the step-by-step instructions are included in the package. It will be a matter of carefully pulling up and out, then reverse the steps to install.

Posted on Jun 08, 2009

  • 56 Answers

SOURCE: 1998 Pontiac transport van wont start:

Well you hit all the major ones, could be crank position sensor, ignition module, a bad coil pack (it should have 3), you need to check that you have spark to each plug while the engine is turning over (!!!be careful as this will hurt if you get shocked!!!), this will rule out coil packs. if you have no spark to any plug your looking at a bad ingnition module (which is what the coil packs bolt to). Hope this gets you on the right track!

Posted on Feb 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the crank position sensor,the ignition module,and coil pack at on a 1998 Pontiac Montana transport


What size engine . 3.1 or 3.4 Has two crankshaft position sensors
Crankshaft Position (CKP) Sensor (24X)
RH side of engine at end of crankshaf, behind harmonic balencer
Engine Controls Component Views
Engine Controls Connector End Views
Crankshaft Position (CKP) Sensor (7X)
Lower rear of engine
Ignition Control (IC) Module
Top center rear of engine coils are on top of ICM - ignition control module .

Apr 05, 2017 | Pontiac Montana Cars & Trucks

1 Answer

Where is the crank position sensor and the ignition module ,coil pack at on a 1998 Pontiac Montana transport


Your spark plug wires go to coils, coils sit on top of ignition module.You have two crank sensors, if crank sensor issue, check the 7x crank sensor, on back side of engine block, down low, two wire connector, wire colors, yellow and purple.
coil pack-byehkl55qszftorfvkdndylg-2-0.jpg

Apr 05, 2017 | Pontiac Montana Cars & Trucks

1 Answer

Where is the computer located on a 1998 Pontiac transport van?


Powertrain Control Module (PCM)
Engine compartment, inside air cleaner assembly

Aug 09, 2015 | Pontiac Cars & Trucks

1 Answer

Need a picture of control module for 1998 pontiac bonneville se 3800


There are several control modules.
This is the engine control module.
1f65850d-40fa-4253-a2c4-9ae56c00ddd8.jpg
This is the ignition control module.
7276a048-a703-487c-a3e2-14ff95ca16a8.jpg
Hope this helps.

Jan 02, 2014 | 1998 Pontiac Bonneville

1 Answer

97 pontiac transport no power to ignition module


Not sure if I am following you right.
The engine has 3 coils that fire the plugs. The coils are mounted on a module that provides voltage and ground to the coils.
The module gets power from a 20amp fuse marked "Inj" for injector.
The computer controls the module based on info from the various sensors.
A mechanic would do a pin test on the module to diagnose a no spark condition.

Jul 15, 2012 | 1997 Pontiac Trans Sport

1 Answer

1998 Pontiac Bonneville SLE will turns over but will not run


I would check to see if the spark plugs are fouled. Or you might have a bad ignition control module (mounted under the coil packs). Auto Zone can test the ignition control module.

May 19, 2010 | 1998 Pontiac Bonneville

1 Answer

1998 Pontiac transport van wont start:


Well you hit all the major ones, could be crank position sensor, ignition module, a bad coil pack (it should have 3), you need to check that you have spark to each plug while the engine is turning over (!!!be careful as this will hurt if you get shocked!!!), this will rule out coil packs. if you have no spark to any plug your looking at a bad ingnition module (which is what the coil packs bolt to). Hope this gets you on the right track!

Feb 08, 2010 | 1998 Pontiac Trans

1 Answer

Hi I have a 1998 pontiac transport. i replaced the head gaskets and fired up. It starts everytime but then quits right away. Aby ideas????


Check the cam sensor plugin,and the crankshaft sensor plugin.If they are fine the cam sensor may be bad,but the ignition module can be bad also.was it running before the head job?If the computer does not sense oil pressure,it will not let the fuel pump run,so check that out as well.

Nov 02, 2009 | 1997 Pontiac Trans Sport

1 Answer

My 1997 pontiac transport van will not start


CHECK FOR FUEL AND SPARK FIRST.
CHECK ALL THE CONNECTORS ON EVERYTHING, ESPECIALLY THE IGNITION MODULE CONNECTIONS. THE CRANK SENSOR OFF THE BACK OF THE ENGINE COMES UP ALONG THE FUEL LINES AND CONNECTS TO THE IGNITION MODULE.

Jun 23, 2009 | 1997 Pontiac Trans Sport

1 Answer

Ignition module?


I had the same problem with my 1992 Transport. I fixed it by replacing the ignition module which took about 20 minutes, and should be easily accomplished by anyone with moderate repair skills. The problem with mine faulty ignition module was resolved temporarily by unplugging/re-plugging it from the computer (under the dash), or unplugging/re-plugging it from the distributor assembly harness. Every time I reseated the connector, the engine started up fine. I could also let the engine set a while, and it would restart. However, when it was decided to fail, there was no fuel being injected into the engine. This is logical since the ignition module tracks the engine RPM and sends this data to the computer to tell it how much fuel to inject. Check your fuel injectors when you crack it over when you experience the problem, and if you get no fuel, it's likely your ignition module. I think i paid 30 bucks at autozone for a new one.

Feb 21, 2009 | 1993 Pontiac Trans Sport

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...