Question about 1991 Nissan Pathfinder

Open Question

How to locate radiator drain plug

Want to flush radiator but cannot locate radiator drain plug. Vehicle is actually a Terrano 4x4

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: instrument panel faulty

Disconnect the battery for 7 minutes then try it. It is a common problem with all terranos II.

Then tell me if it worked to arpcpro \a\ gmail com

Posted on Feb 07, 2009

Ad
  • 1 Answer

SOURCE: heater plugs for nissan terrano 2

i have a nissan terrano 2.7 dti heater light not coming on some times dose and some times does'nt and it wont start

Posted on Mar 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I flush the radiator


Removing the drain plug and just letting old coolant drain out and then refilling doesn't really flush it out. It only drains what is in the radiator and it doesn't circulate and flush what is in the engine and heater core.
Take radiator cap off, then take top radiator hose off where it comnects to the radiator..only disconnect that side of the radiator hose aim end of hose downwards and leave it there. Take a wet rag and push it into the radiator where the hose was connected..you don't want to push it in so far you have trouble removing after flushing...the wet rag is just to limit the amount of water that will come out of radiator where hose is no longer attached..crank car and coolant will start to slowly come out the vend of radiator hose aimed downward...have a hose or 4 or 5gallons of water...right after you crank the car pour the water or befilling the radiator with the hose...you want to keep the water going in the radiator as to keep it fulI...replace what is coming out of radiator hose...continue to add water until what is coming out of the radiator hose is clear water.. this way the water is circulating through the entire cooling system and engine. When water is coming out clean...turn car off remove rag from radiator and reconnecupper radiator hose..the drainplug is at the bottom of the radiator on the side of radiator that is on the drivers side of the car....remove drain plug and drain water left in radiator..replace drain plug and crank vehicle and fill radiator with coolant recommended for your vehicle... Sounds more complicated than it really is..other option take to a repair shop and have them flush with machine..usually around 100 bucks at ashop..Iif you have any questions Iwill be glad to answer..

Sep 20, 2015 | 1994 Acura Legend

1 Answer

Where is the Radiator drain plug located on a 2002 Town and Country Limited 3.8L


If equipped with a drain plug ( some manufacturers don't supply one ) it will be located at the lower left or lower right of the radiator. It may have a butterfly type screw or could have a recessed phillips head screw.

Jul 04, 2015 | 2002 Chrysler Town & Country

1 Answer

Radiator drain plug how do i open it to drain the radiator


You don't. You never open the petcock on radiators with plastic tanks because the petcock always breaks. If it doesn't break, it'll leak when you close it. No pro ever uses the petcock. You loosen the lower radiator hose clamp and yank the lower radiator hose. You'll take a bath, but it'll all be drained in about 1.5 mins. Then reconnect. You'll actually drain far more coolant that way too.

Sep 24, 2017 | 2003 Chrysler Town & Country

1 Answer

How to flush radiator


First you need to drain all the coolant out. There should be a spot on the bottom of the radiator or a drain plug somehwere located on the vehicle, you might want to look that up. But drain the system, then just run a hose through it and flush everything out, the longer the better, do it until you see a clear stream of water coming out, then just replenish with the correct amout of coolant/water.

Apr 04, 2011 | Mercury Milan Hybrid Cars & Trucks

2 Answers

I have a 1995 buick century. i want to flush radiator, but i couldn't located the draining valve. i need a help, if you can locate the draining valve for radiator.


Hi, if there is not a petcock or plug at the bottom of the radiator, you can just remove the lower radiator hose to drain the coolant. Many cars do not have drain plugs. Please let me know if you have more questions and thanks for using FixYa.

Jan 31, 2011 | 1995 Buick Century

1 Answer

Were is the drain **** for the radiator 2005 expedition?


Hello! The drain plug is located near the front passenger side wheel well...Open it up and drain the radiator... What I like to do next is remove the t-stat and replace waterneck... Now fill radiator with water (actually fill degas bottle) and run engine with upper hose removed at radiator... Flush until only clean clear water comes out of hose... Drain radiator, replace t-stat, fill radiator with coolant and you're done...Guru....Saailer

Oct 04, 2010 | 2005 Ford Expedition

1 Answer

Where is the radiator drain plug located on a 97 chevy 1500 Z71? I'm trying to flush the radiator,but cannot find it.


It's located on the drivers side of the radiator opposite of the lower radiator hose. Note: you may be better off disconnecting the lower radiator hose, it's common for the drain plug to break or the O-rings to split causing more work to drain the radiator. That's why most tech's will drain the radiator from the lower radiator hose, less chance of breaking the radiator drain plug and most new cars now don't come with a drain plug to the radiator.

Mar 05, 2010 | 1997 Chevrolet C3500

2 Answers

Where is drain plug for 1998 dakota 4x4 i need to drain radiator &what is the turning thing on the lower drivers side of radiator 4


1998 dakota 4x4
You can remove the drain plug in the bottom on the radiator.
You can remove the lower radiator hose. Since the vehicle is 10 years old you may want to inspect the hoses for replacement anyway.

) Make sure the vehicle is cool.
) Slightly loosen the radiator cap to release any pressure.
) Re-tighten the radiator cap.
) Place a suitable container under the drain point.
) open the drain.
) Re-loosen the radiator cap again.
) Allow to drain.
) REPLACE THE DRAIN PLUG.
* At this point the radiator can be fill with water and a radiator cleaning agent- run the engine - allow to warm up.
* Re-drain the radiator - .
) REPLACE THE DRAIN PLUG.
) Refill the radiator with water/anti-freeze.
) Dispose of waste fluid according to the local regulations. Some city dumps will accept it. Some parts stores may accept it. Do not pour down the drain or dump on the ground.

Apr 19, 2009 | Dodge Dakota Cars & Trucks

1 Answer

Want to change out coolent in radiator myself is it a wise choice


Things you will need:
Radiator coolant mixture (get from garage)
Radiator flush fluid (also from garage)
Distilled water (Or if your me garden hose water ;) )

Take off the radiator cap when engine is COOL. Find the drain plug located in the bottom of the radiator (normaly hand tight) and let it drain out into a catch container. Put the drain plug back in, follow the instructions on the flush container topping the radiator back up. Let engine run as directed on bottle and then carefuly undo the radiator cap using a rag as not to burn yourself. Then remove the plug again and drain out the flush fluid. Then repeat the process with the radiator fluid as instructed on the bottle.

Apr 14, 2009 | 1999 Buick LeSabre

1 Answer

Radiator flushing


Hi and welcome to FixYa,

Initially, on most cars, the radiator drain plug is located at the lowest most section, often to one side. It could be a wingnut type or a regular bolt or squarish variety. In some instances it would be pretty difficulty to locate nor access due to the other coverings and components of the front end of the vehicle.

Alternately, removing the lower hose radiator side would serve the same purpose.

Good luck and Thank you for using FixYa. Happy Holidays.

Dec 21, 2008 | 1997 Dodge Stratus

Not finding what you are looking for?
1991 Nissan Pathfinder Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...