Question about Cars & Trucks

Open Question

Does my 2008 chevy impala have anti lock brakes on all four or just two

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Molson02536
  • 3854 Answers

SOURCE: 2001 Chevy Silverado anti-lock brakes activate on

One of the sensors has gone bad and needs to be replaced, the other thing to that would also do that is the ABS sensor is dirty or needs to be re gaped to the speed ring on the hub. There was a issue bulletin with your Tahoe on the ABS activating under 8 km/h. Good luck and hope this helps, if not clean out the sensor with brake parts cleaner and check the wire harness and ABS sensor bracket. Re gap the sensor to the speed ring hub. Here is the bulletin. Anti lock Brake (ABS) Activation at Low Speeds (Clean Wheel Speed Sensor Mounting Surface) #03-05-25-007C - (05/16/2006) 2001-2006 Chevrolet Suburban, Tahoe

Posted on Jun 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What size allen needed to remove break pads


Allen wrenches usually come in a set, try 3/8.

Apr 30, 2016 | 2008 Chevrolet Chevrolet Impala LS

1 Answer

Yes my impale have an anti theaft


Chevy Impala 2008 won't crank and won't start, fix found ...

? 1:43
https://www.youtube.com/watch?v=ITvU_vXMrDY
Nov 26, 2012 - Uploaded by Artome001
Chevy Impala, 2008, does not crank or start. ... I have 2008impala ss i turned my car off an tried restart it an all i got was clicking .... How to Override Bypass GM VATS Passlock 1 2 Passkey Anti Theft System - Duration: 11:11.

Engine Starts and Stalls Due to Secutiry System Fault ...

repairpal.com > Problems > Chevrolet > Impala
my Impala also has this problem, the "Security" light comes on, I cannot start it. Ihave to wait ... car wont start due to no fire to the crank sensor and fuel pump.Missing: impale

How Can You Turn Off The Anti Theft Device - CarGurus

www.cargurus.com > Questions > Chevrolet > Malibu

CarGurus

Jan 23, 2016 | Cars & Trucks

1 Answer

My 2002 chevy impala's service traction light comes on after shifting from reverse to drive. it aslo seems to activate the anti lock brake mode at that time. it resets itself and does fine after


Check your brake sensors for debris inside the brake drum or caliper. This all depends on how your Model counts the turns on each wheel.

There are some Models which have a sensor in the axle and others which rely on the 4 individual wheel sensors.

When brake debris or rust "blinds" the sensors you get the problem you have unless it is a clearance problem with sloop in the differential.

I hope my solution is helpful.

Jun 06, 2012 | Chevrolet Impala Cars & Trucks

2 Answers

My husband's 2008 chevy impala will not shift out of park?


first check to see if any fuses are blown. the interlock is not releasing if the fuse is good there is a switch on the brake pedal that signals the lock to undo check to see if there is power to it. if these two things are good the lock release on the column may be bad and not releasing the gear shift. hope this helps

Feb 07, 2011 | 2008 Chevrolet Impala

1 Answer

My wifes car is stuck in park. It is a 2008 chevy impala


These cars have a shifter lock that is integrated with your brake pedal. The solenoid should release when your pedal is depressed.Check to make sure your fuses are good first.

Feb 01, 2010 | 2003 Chevrolet Impala

1 Answer

How do you release the anti-lock brake system to replace the rear brake rotors on a 2001 Chevy Impala?


I assume you want to take the caliper off first. Remove caliper bolts & using a pry common screwdriver pry piston on caliper back in a bit or enough to allow the caliper's removal. After this, remove rotor. I hope this helps!

Oct 03, 2009 | 2001 Chevrolet Impala

1 Answer

Is the RPM gauge and the transmission connected for a 2001 chevy impala?The Anti light brakes and traction control light turn on. Now the transmission does seem to shift properly and the RPM gauge moves.


Anti lock brakes and traction controls will light if there is too much tire pressure differential. That mean a low tire turns more rpm in a mile than a full tire so it constantly thinks it is slipping in either /both taking off or braking... Tire pressure is important. Check it!

Aug 27, 2009 | Chevrolet Impala Cars & Trucks

1 Answer

Anti-lock brakes come on when applied under normal conditions


Sounds like a faulty wheel sensor. I would suggest a trip to the repair shop.

May 05, 2009 | 2002 Chevrolet Impala

1 Answer

2008 impala shift lever locked


This is a chevy thing, You must if you can park on flat service, you Must step on the brake pedal hard and muscle the thing out of park.

Apr 12, 2009 | 2008 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...